-
224 Valkyrie - factory Federal 75/90 compared to Nosler 80 CC loads
- Reloading press used (list modifications if relevant)
illon 550 but weighed charges on Hornady digital powder dispenser/scale - Caliber:224 Valkyrie
- Bullet (Weight, Coating, Profile, Manufacturer): Nosler 80 Grain Custom Competition - BTHP
- Powder manufacturer, type and charge; volume, type (ball, stick, flake): 26.0 CFE 223
- Dies used: Lee rifle dies with factory crimp
- Primers used: Federal Small Rifle
- Cartridge Overall Length (COAL): 2.26
- Chronograph data (if possible): NA
- Goals intended with this load: Target
- Results - accuracy, smokiness, clean burning, flash, temperature, smell, brass deformation, etc.: 1/2 inch group at 100 yards
- Problems encountered and fixes applied: None
- Anything of interest: Federal Factory American Eagle 75 shot 1.5+ inch and Federal 90 Fusions shot about 3 inch in same upper
I like alternative caliber ARs and so I built a 20 inch AR upper with a Bison Armory "scratch and dent" 20 inch 1-6.5 stainless barrel, BCM "blem" upper, and a Thanksgiving special price ALG freefloat handguard. I try to buy AR parts when they have specials. The Federal factory fodder is disappointing so I was excited that my first 224V reloads shot so well. After zeroing at 100, I went to the 300 and 500 yard ranges and the loads shot well. However, 224V 80 grains do not impress on steel at 500 yards - steel barely moved and it was foggy/rainy so not much splash to see.
Picture is sideways but "top" = Federal Factory 75, "middle" = Federal Factory 90 Fusion, "bottom" = my reloads with Nosler 80 CC, all 5 shot groups
![Name: IMG_1107.jpg
Views: 1049
Size: 102.1 KB](https://pistol-forum.com/attachment.php?s=08a3f22c5dc19a0726c9d029005675ce&attachmentid=33516&d=1545618376)
Last edited by ranger; 12-23-2018 at 09:39 PM.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules