CAUTION:
REVOLVERS WITH TITANIUM ALLOY CYLINDERS
Titanium alloy cylinders weigh approximately 60% of what a similarly
sized stainless steel cylinder weighs and yet is able to withstand
the same operating pressures. Care and cleaning of the
revolver’s titanium alloy cylinder consists of normal gun cleaning
procedures using high quality gun oil and cleaning solvents when
necessary. However, under NO circumstances should the cylinder’s
chambers (charge holes) or front face be cleaned with an abrasive
material such as sand paper, Scotch Brite™, Crocus Cloth, etc. To
do so will disrupt it’s protective surface layer and greatly reduce the
cylinder’s service life because of excessive erosion that will take
place while firing and will void your revolver’s warranty.