Results 1 to 2 of 2

Thread: 340PD Ejector Rod?

  1. #1

    340PD Ejector Rod?

    I recently picked up a 340PD at a very attractive price. Everything checked out with my basic inspection but apparently I missed an issue with the ejector rod. What's happening is, when two particular chambers on the cylinder are facing to the left of the gun, about 75% of the time if I hit the ejector rod it will stick. It's also a bit stiffer to push. It'll go all the way out but on the return it'll hang up about a quarter inch from fully flush. Rotated to where any other chamber is facing to the left, it works as normal.

    Any idea what this may be and what I'd need to replace?

  2. #2
    Sounds like it's either bent or loose, not screwed in all the way. The yoke could be bent also. The easiest thing to check would be to make sure the it's not loose be trying to screw it in. It's a reverse thread so turn it counterclockwise.
    We could isolate Russia totally from the world and maybe they could apply for membership after 2000 years.

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •