I don't know if this is a common issue but I've seen at least one of the 14# springs that came with the Wilson bar have an inner diameter that is too small for the hammer strut causing a really shitty trigger pull for the trigger weight. The trigger pull was actually better with the 16# Beretta spring. Switching to the 13# Wilson fixed it (for some reason only the 14# had the size issue).
I really doubt that the actual trigger bar is failing at 2k rounds, that seems pretty low. Did you or the previous owner do any other trigger work? Any polishing/cutting of sear or hammer engagement surfaces?
Why not contact Wilson directly, and send it to them for examination/replacement?
Best, Jon
Look at the sear and hammer contact area. just a few weeks ago I first noticed that, in DA, the sear is moved by the hammer before the trigger bar comes into play. I have polished that section of the hammer on mine.
These are the big questions:
1.) Are the guns from Wilson?
2.) Did you, or wilson actually replace with the wilson trigger bar as part of a trigger job?
Wilson doesn't actually put a WC trigger bar into the WC guns. You have to fit it, or send the gun in for a trigger job and ask them to fit it.
Regarding the 2K rounds before they got soft: Yeah. That's a bit below my average experience, but not out of the norm... I'd wear grooves in the stock bar after ~2 weeks of dry fire when I was doing that for ~hour ever night.
The Guns in question are Brig tacs - both of these purchased new from Wilson
The trigger bars - also purchased new from Wilson
Dropped in by me. No fitting. None needed - full function in Da/SA with reduced over travel from day one.
I want to love these guns for the long run. If this part is known to wear that quickly, my enthusiasm will be heavily dampened
Last edited by Duke; 06-19-2018 at 11:22 AM.
Les - please overlook my misreading of your post.
Wilson told me today that they were surprised the parts dropped in with no issues.
It was then that your post became clear to me.
Again - my fault.
So that leads us to - if I fit them/have them fit will they still do go soft and wear in 2-3k rounds/dry fire?