-
Site Supporter
P2000 question
I have two P2000's and a P2000sk. All LEM with the V1 springs in them. On my P2000 and P2000sk dated BE, they both have a much shorter and cleaner trigger reset than the P2000 dated BG. Any ideas why they would be different? Any suggestions of simple things I could check real quick?
-
Bump as I am interested in why this is happening as well. Any ideas anyone?
-
Site Supporter
Figured it out. The cocking piece or "elbow" spring it either broken or dislodged. There is a leg of it that is supposed to be visible in the notch in the face of the hammer. It ain't there. If I hold the hammer back with my finger to simulate spring tension and ease it forward while releasing the trigger, it resets normally.
Now I have to take it apart and see if it is broken.
-
Site Supporter
Spring was not broken, just came off of the hammer. I put it all back together and function tested it. Back to normal.
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules