Results 1 to 4 of 4

Thread: P2000 question

  1. #1

    P2000 question

    I have two P2000's and a P2000sk. All LEM with the V1 springs in them. On my P2000 and P2000sk dated BE, they both have a much shorter and cleaner trigger reset than the P2000 dated BG. Any ideas why they would be different? Any suggestions of simple things I could check real quick?

  2. #2
    Hammertime
    Join Date
    Apr 2016
    Location
    Desert Southwest
    Bump as I am interested in why this is happening as well. Any ideas anyone?

  3. #3
    Figured it out. The cocking piece or "elbow" spring it either broken or dislodged. There is a leg of it that is supposed to be visible in the notch in the face of the hammer. It ain't there. If I hold the hammer back with my finger to simulate spring tension and ease it forward while releasing the trigger, it resets normally.

    Now I have to take it apart and see if it is broken.

  4. #4
    Spring was not broken, just came off of the hammer. I put it all back together and function tested it. Back to normal.

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •