I've got a lot of tubes, but apparently I've lost a lot of the R clips. Somebody makes and sells these things, I just can't find them small enough. Anybody know where to find them (other than in Dillon's parts kits)?
I've got a lot of tubes, but apparently I've lost a lot of the R clips. Somebody makes and sells these things, I just can't find them small enough. Anybody know where to find them (other than in Dillon's parts kits)?
"Gunfighting is a thinking man's game. So we might want to bring thinking back into it."-MDFA
Beware of my temper, and the dog that I've found...
I agree with Damon; call them and they'll likely just send you some.
If that doesn't work, McMaster-Carr (purveyors of all useful things) has them by the hundred:Hair Pin, 5/64 X 1 1/4 for clevis 1/4-3/8
Your local well equipped hardware store should have something that will work. A smaller sized paper clip (unfolded,with a very slight bend in it, just enough to keep tension in both holes) will work until you get a new one.
Pick your poison.
https://www.amazon.com/s/?ie=UTF8&ke...hoCcIkQAvD_BwE
Sent from my iPhone using Tapatalk
AKA: SkyLine1
I can probably send you some. I have multiple sizes and random shit I don't use sitting in boxes, so I need to know EXACTLY what you need. Pics and references photos (like compared to other items/color coding/etc). I used them for a very short time, and I haven't used primer pick up tubes in years so I won't know what I'm looking for unless you spell it out in crayon.
ETA: If you're in a rush, might be worth sourcing elsewhere as in still un-assing my gun gear since the move.
Last edited by Odin Bravo One; 10-08-2017 at 08:14 PM.
You can get much more of what you want with a kind word and a gun, than with a kind word alone.
I've been waiting on email from Dillon. These are an odd size, less than 1/32" diameter (actually .040") and about 1" long. McMaster has some that might work, or could make the tubes work for them. Chain stores don't usually have anything this small.
Sean, if everything else falls through I'll get you pics, info, crayon drawings.
"Gunfighting is a thinking man's game. So we might want to bring thinking back into it."-MDFA
Beware of my temper, and the dog that I've found...
I sourced a size that works fine with the Dillon tubes at a local Ace Hardware store.
Dillon used to send them for free but it take a week or two for them to arrive in the mail.
They are 1" x 3/64" cotter pins
Grainger part 2UJK4. https://www.grainger.com/product/GRA...rchQuery=2UJK4
My local Ace has them for 12 cents each.
Whether you think you can or you can't, you're probably right.
"Gunfighting is a thinking man's game. So we might want to bring thinking back into it."-MDFA
Beware of my temper, and the dog that I've found...