Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: Minimum COAL question

  1. #11
    Quote Originally Posted by LittleLebowski View Post
    Much thanks, gents! I was hoping for practical advice not "work up a load, it's the only way you'll know" and I got it

    Time to warm up ye old sicksfitty.
    That definitely seems odd and a bit more work overall. Are you using a case gauge or the barrel to check the rounds? I don't see why there would be a difference between the Gen 5 and other Glocks.
    This country needs an enema- Blues approved sig line

  2. #12
    Member olstyn's Avatar
    Join Date
    Sep 2014
    Location
    Minnesota
    My Walthers won't eat MG 124 JHPs loaded any longer than 1.075", and I've put as much as 4.2 grains of VV N320 behind that bullet at that OAL in order to make ~130 PF out of a P99c (3.5" barrel). Primers were starting to get just a tiny bit flattened, but nothing scary. 1.09" OAL with a 124 gr bullet and 3.7 of a powder with a very similar burn rate wouldn't scare me. As always, be careful and use a chrono, but you're probably fine.

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •