Here's the one from my 75bd. Can't remember how many rounds, probably two or three weeks of dry firing 4-5 days a week? Idk.
Sent from my Pixel 2 using Tapatalk
Here's the one from my 75bd. Can't remember how many rounds, probably two or three weeks of dry firing 4-5 days a week? Idk.
Sent from my Pixel 2 using Tapatalk
Nope, I only have a 1.5mm and a 3mm punch. I found two more from a P07 and they are less damaged the one in the picture. A 1.5mm punch won't fit through them (the stock pins). The 1.5 punch does fit in the cgw roll pin, but not the 3mm punch. I don't have any damaged cgw roll pins
Sent from my Pixel 2 using Tapatalk
Last edited by Mirolynmonbro; 02-21-2018 at 10:25 PM.
Thanks for checking!
“There is no growth in the comfort zone.”--Jocko Willink
"You can never have too many knives." --Joe Ambercrombie
Has the problem with the FP caused any serious issues for anyone?
So this happened yesterday. I’ll try to get a range report in soon.
Men freely believe that which they desire.
Julius Caesar
Got a threaded barrel. Primary Machine stealth comp is ordered.
Now to wait for a second threaded barrel to trade nonthreaded barrel
Sent from my Pixel 2 using Tapatalk
My Gen 1.
CZ Custom Htac rear and 6.5 FO front.
Polish and tweak per CGW/SCHMEKY.
CGW firing pin, reset kit, trs and 15# mainspring.
Stippled the grip myself, slide has been re-parkerized once.
Had the barrel throated to feed lead bullets better, cast 155 grain bullets and they are seated out pretty far.
DA-8# has a smooth but slight hitch, not noticeable at speed.
SA-3# Superb rolling break, very easy to maintain a sight picture.
I have a PX4CC. I feel it's a flip of the coin. Both are excellent at what they do. I find reloads to be easier with the CZ, a slight edge to the PX4 on the trigger pull.
Last edited by timotab; 04-14-2018 at 11:59 AM.
I’ve been wondering what you guys are running for sights on these? I prefer a black rear/hi-viz front with a “number two” (POA/POI top of the blade) sight picture.
Sent from my iPhone using Tapatalk