BCM MK12 MOD O

[LittleLebowski]

This thread is about BCM, not Centurion Arms.

Anything you buy from Bravo Company is backed by the integrity of the company's owner, Paul Buffoni, a man I would lay it on the line for. Buy in confidence.

[Clusterfrack]

We were using our Mk262 clone load (77 Berger/24 gr XBR8208) for good results out to 900 yds.

[RONK]

It's now up to my customer to make a decision.I've only heard good things about BCM's integrity.

[SeriousStudent]

I used one of BCM's SS410 barrels to build a RECCE clone:

https://www.bravocompanyusa.com/BCM-...ss410-16-8.htm

I know it's not a SPR, but the barrel is outstanding, and comes from the same place. With cheap ammo, it will shoot 5-shot groups at 100 meters that measure under an inch. With the good stuff, like Black Hills 77-grain or the IMI Razor 77-grain, it will shoot a 10-shot string into 5/8" at 100 meters. I shoot it with a dedicated can, a Griffin SPR that works very well.

I'm using this optic with it: http://www.bushnell.com/tactical/rif...i-3-5-21x-50mm. I really like the Horus H-59 reticle.

The BCM barrels that Paul uses are really nice. And like LL mentioned, he is an excellent guy that does a lot of terrific things for our warfighters and first responders.

[Shawn Dodson]

SWFA SS Tactical Riflescope 6x42mm or 10x42mm MOA-quad reticle.

[RONK]

I used one of BCM's SS410 barrels to build a RECCE clone:

https://www.bravocompanyusa.com/BCM-...ss410-16-8.htm

I know it's not a SPR, but the barrel is outstanding, and comes from the same place. With cheap ammo, it will shoot 5-shot groups at 100 meters that measure under an inch. With the good stuff, like Black Hills 77-grain or the IMI Razor 77-grain, it will shoot a 10-shot string into 5/8" at 100 meters. I shoot it with a dedicated can, a Griffin SPR that works very well.

I'm using this optic with it: http://www.bushnell.com/tactical/rif...i-3-5-21x-50mm. I really like the Horus H-59 reticle.

The BCM barrels that Paul uses are really nice. And like LL mentioned, he is an excellent guy that does a lot of terrific things for our warfighters and first responders.

Thank you all again.My customer still hasn't committed as yet.Personaly,I'm very interested in the RECCE rifle concept.SeriousStudent,I'm interested in the rifle you mentioned,thanks.If BCM did a complete rifle with the KD4 upper that DanM wrote about,I'd consdider that also.

[SeriousStudent]

Thank you all again.My customer still hasn't committed as yet.Personaly,I'm very interested in the RECCE rifle concept.SeriousStudent,I'm interested in the rifle you mentioned,thanks.If BCM did a complete rifle with the KD4 upper that DanM wrote about,that would be also.

Sure, this is what I put together:



It was a lot of fun to build, and is even more fun to shoot.

[RONK]

Thanks,nice looking rifle,impressive groups.