The evil twins, .22 LR and .22 Magnum, as they can both be shot out of the H&R 666. Note they are also cannot be reloaded, get stuck in brass of real cartridges, etc.
.380
.40
9x18
Mods here are shit
The evil twins, .22 LR and .22 Magnum, as they can both be shot out of the H&R 666. Note they are also cannot be reloaded, get stuck in brass of real cartridges, etc.
Last edited by BehindBlueI's; 07-06-2017 at 02:37 PM.
Heh….I’m lucky I didn’t end up running it through one of my Glocks the next time at the range. I recently upgraded to an LnL from a Lee Classic Turret. On the LCT I could usually tell during the decap and resize that I had a .380 on the press; at worst I’d catch it during the powder throw. On the LnL that different feeling is masked by everything else going on and the little turd .380 made it all the way through. Fortunately I’m looking over everything I’m loading as I learn my way around the press.
.380 by far! Takes longer to sort out, and they still end up sneaking through.
Mods here are shit. The cartridge cases don't suck: the people who shoot them and leave their brass to mix with 9mm do.
I'd say .40 is the least problematic. If I miss a .380 case it usually won't prime in the 550, but if it does it's a big problem. I had one 9x18 get through the 550 but it wouldn't chamber. The particularly demonic 9x18 has a thick case wall with a step inside the case that looks like it's designed to mangle press parts.
"Gunfighting is a thinking man's game. So we might want to bring thinking back into it."-MDFA
Beware of my temper, and the dog that I've found...
.666 Brimstone ?
The satanic case is the one that gets in the way of what you are currently loading. So it's all relative.
"A man with an experience is not a slave to a man with an opinion."
whatever manus use that shitty 9mm stepped brass.
Just use a 380 shell holder, steel shell holders never wear out in a kinetic hammer. Throw the aluminum away.