I strongly recommend you seat and crimp in two different stations. It's very difficult to set the press up so that it seats and crimps in one operation. This is because the press stresses differently when you're working on one station (in set up) versus loading with a full shellplate. Plus, you have five stations on the press, so there's no need.
I'm not a fan of the Lee FCD. As it fully sizes the case down to minimum SAAMI specs, it also sizes down the bullet where it's seated in the case. Undersized bullets lead to poor accuracy and leading. Try using your Lee seater/crimper in station 5 with the seating stem removed so that it only crimps. As long as your loaded rounds pass the plunk test, you're g-t-g.
Good luck!