Page 3 of 4 FirstFirst 1234 LastLast
Results 21 to 30 of 33

Thread: Interest in Dark Star Gear holsters for K and N frames?

  1. #21
    Member Dark Star Gear's Avatar
    Join Date
    Oct 2015
    Location
    Pittsburgh, PA
    So.... I don't know much about revolvers. I know J-frames, sorta, as I've done a fair amount of work to ensure our holster is compatible with as broad of range as possible. For this little venture we're gonna need to have things simplified such that we don't screw it up. We'll have the clip and loop/strut as an attachment option and possibly RCS overhooks. How things will work with the overhooks depends on the weight and the sights on your gun. For test fitting we can only ensure the fitment to the guns on hand. That shouldn't be an issue but as S&W has made some of these for decades on end it's not outta the realm of possibility that things fit weird. I don't want it to sound like a cop out but all we can make is what is shown above. Some adjustment will be available, mainly enough to make each holster too tight and too loose leaving what we've found to be a rather tolerable range for most. This should work out for everyone but I do ask that folks be mindful that things may not fit quite right.


    I'll talk with Trajan and get the times squared away soon but I have a day or two of lead time allotted for these.


    I'll have an order form on the site at some point this weekend or before Christmas to get them set up and will be listed as:
    Quote Originally Posted by Trajan View Post
    4" 27-2,
    4" 66-1
    2.5" 66-
    Custom lengths are possible but I will request a measurement from the actual gun.


    More to come later. I am gonna use a K frame blue gun, one that has proven useless for fit, to work up the attachment options and will post up later on this weekend.
    Last edited by Dark Star Gear; 12-17-2016 at 03:42 PM.
    Dark Star Gear
    Best method to contact us is email: info@darkstargear.com

  2. #22
    careful what you wish for blues's Avatar
    Join Date
    Aug 2016
    Location
    blue ridge mtns
    Tom, as long as we're talking revolvers and not L frames, can you point me at examples of J frame rigs now that I just ordered one?

    I'm sure I'll need one of yours for AIWB and / or pocket carry. Thanks and sorry for the digression.
    Last edited by blues; 12-17-2016 at 04:14 PM.
    “Tactics without strategy is the noise before defeat.” - Sun Tzu | "Everybody has a plan until they get punched in the mouth." - Mike Tyson

  3. #23
    Member Leroy Suggs's Avatar
    Join Date
    May 2013
    Location
    Gnatville, Fl.
    Quote Originally Posted by blues View Post
    Tom, as long as we're talking revolvers and not L frames, can you point me at examples of J frame rigs now that I just ordered one?

    I'm sure I'll need one of yours for AIWB and / or pocket carry. Thanks and sorry for the digression.
    The DSG clip on AIWB for J's is as good as it gets.
    Can't beat it.

  4. #24
    careful what you wish for blues's Avatar
    Join Date
    Aug 2016
    Location
    blue ridge mtns
    Quote Originally Posted by hubcap View Post
    The DSG clip on AIWB for J's is as good as it gets.
    Can't beat it.
    I fully intend to find out ASAP. It was your (and someone else's, I believe) posts that alerted me to the existence of the holster and for that I'm in your debt. I love my DSG for my 19/26.
    “Tactics without strategy is the noise before defeat.” - Sun Tzu | "Everybody has a plan until they get punched in the mouth." - Mike Tyson

  5. #25
    Member Dark Star Gear's Avatar
    Join Date
    Oct 2015
    Location
    Pittsburgh, PA
    Three inch K-frame is in the works, should see it in a week or three. If anyone has a special K-frame with some odd features that make fitment difficult please let me know and we'll work it into the mold. Not looking to offer more than one variant so we're hoping to make it like the J-frame and cover ALL models if feasible.
    Dark Star Gear
    Best method to contact us is email: info@darkstargear.com

  6. #26
    Member
    Join Date
    Sep 2017
    Location
    Springfield, PA
    Can't wait for the 3 inch k frame, it is the king of revolvers for me! I'm in as soon as they are available.

  7. #27
    Member
    Join Date
    Jul 2015
    Location
    Northern Utah
    Quote Originally Posted by Sidheshooter View Post
    4" K frame.
    Saw the threat title, came to post the exact same thing.

  8. #28
    Member
    Join Date
    Sep 2017
    Location
    Springfield, PA
    For the three inch k frames, try to get it to fit both the model 66 with full underlug and rear sights and the model 13/65 without the full underlug and fixed rear sight.

    Side note, the 3" model 65 is the best carry revolver in the world.

  9. #29
    Member 03RN's Avatar
    Join Date
    Aug 2017
    Location
    Rhode Island
    Quote Originally Posted by Dark Star Gear View Post
    Three inch K-frame is in the works, should see it in a week or three. If anyone has a special K-frame with some odd features that make fitment difficult please let me know and we'll work it into the mold. Not looking to offer more than one variant so we're hoping to make it like the J-frame and cover ALL models if feasible.
    Timely

    I'm picking up my 2.75" m66 tomorrow.

  10. #30
    Very interested in a holster for a 4” mod 10 HB.


    Sent from my iPad using Tapatalk

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •