IMR 4227
Lil gun - no loads worked up
I have a few others I'm going to work up when I have time, vhit, another IMR powder (don't recall the #)
I'll give you a list.
Sent from my SAMSUNG-SM-N900A using Tapatalk
IMR 4227
Lil gun - no loads worked up
I have a few others I'm going to work up when I have time, vhit, another IMR powder (don't recall the #)
I'll give you a list.
Sent from my SAMSUNG-SM-N900A using Tapatalk
AKA: SkyLine1
1.348" min 1.368" max SAAMI spec
Sent from my SAMSUNG-SM-N900A using Tapatalk
AKA: SkyLine1
Viht n110 *sub loads only*
LIL'GUN *sub and super*
Accurate 1680 *sub and super*
IMR 4227 sub and supper
Accurate 5744 *super only*
*have not set true loads have just checked for function/no accuracy*
Projectiles
Speer TNT 125gr *my favorite
Hornady 150gr spire point and fmj
Hornady 208gr AMAX *favorite sub
Leatherhead 240gr - their first 300blk projectile
Missouri bullet co 245gr hitek
I really need to get back into load development, been a crazy year at work.
Sent from my SAMSUNG-SM-N900A using Tapatalk
AKA: SkyLine1
Please share when you get some accuracy testing done and what twist rate for the test.
I am having a devil of a time getting Subs to shoot.
Just picked up 3lbs of Lil'Gun after reading the monster thread on it at 300blktalk.com
#RESIST
Copy, I checked all of the brass I was prepping last night (109 pieces) and it was all 1.35 or under so I said Fuck It, deprimed, and wet tumbled with steel pins today.
#RESIST
Same upper with 16" barrel from 1:10 (I know it would keyhole) to 1:8 and then 1:7
All with A-Max 208's at 980's
Need to pick up some other ammo. Best I could muster from what I had was just under 2" at 100 yards.
What gas port length? Pistol or carbine?
With IMR 4227 at 18.0gr 125gr Speer TNT I'm hitting 1-1.5" groups at 100yd. Granted that is a super load.
With Amax 208 and 10.8gr IMR 4227 I was at 1.5-2" at 100yd.
If I was a better shooter I'm sure the groups would shrink a little. Shooting position was sitting using concrete shooting bench with my pack as a bag/rest for the barrel/rail.
AAC 9.5 barrel kit that included their pinned gas block and gas tube.
Sent from my SAMSUNG-SM-N900A using Tapatalk
Last edited by JM Campbell; 08-14-2016 at 08:46 AM.
AKA: SkyLine1