Beretta introducing a Langdon Tactical 92!

[Medusa]

Which ones on yours? it seems like all is well on mine, but I’ll double check. Lots of dry fire, with snap caps, as well. She would have even more rounds through her but I have also put 2k on both of my px4s since I use them for idpa.

[snow white]

Does anybody else have to lollypop the front fiber optic on the rear sight to get poa hits at 7 yards? Is it because its zeroed for 25?

[GyroF-16]

Which ones on yours? it seems like all is well on mine, but I’ll double check. Lots of dry fire, with snap caps, as well. She would have even more rounds through her but I have also put 2k on both of my px4s since I use them for idpa.

The one in the right decocker lever, and (from memory) the horizontal pin on the slide.
I should’ve noticed the one in decocker lever sooner, but I didn’t before the lever came completely off during practice.
But I didn’t, and got a lesson in reassembly.

[LangdonTactical]

The one in the right decocker lever, and (from memory) the horizontal pin on the slide.
I should’ve noticed the one in decocker lever sooner, but I didn’t before the lever came completely off during practice.
But I didn’t, and got a lesson in reassembly.

Yes, we have gone to using just a dab of blue Loctite anytime we put one of those G model roll pins back in the gun. Seems to make that issue go away.

[FrankB]

This is Ernest’s latest miracle!
https://www.langdontactical.com/opti...e-trigger-bar/

EDIT: I just ordered one. 👍👍👍👍👍

[JSGlock34]

I'm intrigued. I imagine this is the product that Ernest was teasing in the Higher Line Podcast. Looks like these are an option for the TJIAB.

For those of us with existing LTT trigger jobs, what kind of fitting will these require? Kinda feel like I need to drop one of these into my Carry Bevel Elite 92G...

[LangdonTactical]

I'm intrigued. I imagine this is the product that Ernest was teasing in the Higher Line Podcast. Looks like these are an option for the TJIAB.

For those of us with existing LTT trigger jobs, what kind of fitting will these require? Kinda feel like I need to drop one of these into my Carry Bevel Elite 92G...

Dang, you beat me to posting this video.

I am going to answer a couple of quick questions that I know are coming;

Yes, it is drop in. More drop-in than the Wilson Trigger Bar.
Yes, it will work on any 92F and later, with or without an LTT trigger job.
Yes, it will work on an existing TJIAB kit that you may already have installed.
If you have a trigger job from us or you have a TJIAB or just a Wilson Trigger Bar, it will reduce reset by about 70% over what you have now.
Yes, the firing pin block is still functional, so the gun is still drop safe.


This may need its own thread???

[JSGlock34]

Dang, you beat me to posting this video.

I am going to answer a couple of quick questions that I know are coming;

Yes, it is drop in. More drop-in than the Wilson Trigger Bar.
Yes, it will work on any 92F and later, with or without an LTT trigger job.
Yes, it will work on an existing TJIAB kit that you may already have installed.
If you have a trigger job from us or you have a TJIAB or just a Wilson Trigger Bar, it will reduce reset by about 70% over what you have now.
Yes, the firing pin block is still functional, so the gun is still drop safe.


This may need its own thread???

That is awesome. I'll be placing an order for a NP3 version once they're available.

I think it does deserve its own dedicated thread.

[FrankB]

This may need its own thread???

Yup. After watching the video, I couldn’t wait to share it, so maybe I jumped the gun on your announcement.

[SeriousStudent]

Ernest, this is outstanding. Thanks very much, I'll be ordering three.