Stihl MS251
Husky 445
Dolmar 421
Mods here are shit
Some other saw
I was going to buy the 576XP the morning I bought the 572xp. If one had been in stock or delivery times would have been reasonable, that would have been the saw I walked out with. I have run several tanks of gas through the 576 with a 32 inch bar stumping for a grader. It is tip heavy with that length but would balance better with a 28 and dang near perfect with a 24. There isn't much that will slow that saw down. I believe it is a 74cc motor with a standard carb and turns close to 10k rpm. I weighs 15 pounds or so depending on bar length but is lighter than the comparable Stilh product. If you need to cut big wood it will more than suffice.
It’s funny, I just put some large 4 spike Pro-Safety spike on the second 461 work saw. Then West Coast Saw has to come out with these like two weeks later. To be fair Gordie warned me.
https://westcoastsaw.com/collections...35933315891364
I’ll probably have a set headed to me this week with a couple of bark boxes as well.
I need some 32 inch bars and another Max Flow filter kits as well.
Double post
I made this post to show the pics Crazy Dane posted, it took a little work to get them to display. Wild pics.
Originally Posted by Crazy Dane
#RESIST
If anyone has a line on a Dolmar 6400/7900/7910, holler. I know about the Home Depot rental ones for sale.
#RESIST
Longest lived ones we've found at work is Ironclad HiViz ones. Arrive at independently since we all buy our own gloves, 4/5 of us run them.