This is my little bench with a Lee turret and the 400 9mm rounds I did this evening.
This is my little bench with a Lee turret and the 400 9mm rounds I did this evening.
Single stage to the right. Hornady LNL
454 Casull, 460 and 500 S&W.
4 Dillon progressive presses for 44 MAGNUM , 45 ACP, 9 mm and 357 Magnum
Today I mounted the RCBS Turret for rifle reloading. I have been busy reloading for load development of 9 mm 147 grain hence all of the extra components.
Sent from my iPad using Tapatalk Pro
I cleaned my bench last week, so that deserves a couple of pics. Dillon 650 is permanently mounted in place. The 550 and the MEC 9000 fit into T-slots in the table and can be swapped out for other presses or tooling.
I have a bad habit of posting in old threads without completely reading through - notice the clamp on the harbor freight mixer - pretty important part. I learned the hard way about the clamp when I was making some concrete and walked into the house for a moment.
I throw a five gal bucket of brass and about 10 pounds of petco lizard media in mine. I don't use stainless media. I put a piece of blue tarp that I cut to size over the end and use bungees to hold it over the end to keep down dust. I run it on a plug in timer for couple hours. I lube the mixer every load.
I roll it out of my shed into the backyard and tumble away.
I run it on a plug in timer for couple hours. I lube the mixer every load.
I’ll refer you to another thread.
Are you now, or have you ever been a member of the Doodie Project?
https://pistol-forum.com/showthread....l=1#post922067
I guess I felt like showing off
Nothing in blue, but love my Redding Turret. .44spl/Mag and .38/357m mostly here.
https://m.youtube.com/watch?v=uRBvMzKZEFY
#MeToo
I keep thinking that I need a turret for precision reloading.
#RESIST