Page 23 of 25 FirstFirst ... 132122232425 LastLast
Results 221 to 230 of 245

Thread: Post your reloading setups!

  1. #221
    This is my little bench with a Lee turret and the 400 9mm rounds I did this evening.
    Name:  0630182034.jpg
Views: 1088
Size:  57.1 KB

  2. #222
    Single stage to the right. Hornady LNL

    454 Casull, 460 and 500 S&W.



    4 Dillon progressive presses for 44 MAGNUM , 45 ACP, 9 mm and 357 Magnum



    Today I mounted the RCBS Turret for rifle reloading. I have been busy reloading for load development of 9 mm 147 grain hence all of the extra components.




    Sent from my iPad using Tapatalk Pro

  3. #223
    Site Supporter
    Join Date
    Feb 2011
    Location
    NH
    I cleaned my bench last week, so that deserves a couple of pics. Dillon 650 is permanently mounted in place. The 550 and the MEC 9000 fit into T-slots in the table and can be swapped out for other presses or tooling.

    Name:  IMG_1863.jpg
Views: 1006
Size:  74.5 KB

    Name:  IMG_1864.jpg
Views: 1007
Size:  78.7 KB

    Name:  IMG_1865.jpg
Views: 1050
Size:  57.0 KB

  4. #224
    Quote Originally Posted by GuanoLoco View Post
    Working with the cement mixer:

    I have a bad habit of posting in old threads without completely reading through - notice the clamp on the harbor freight mixer - pretty important part. I learned the hard way about the clamp when I was making some concrete and walked into the house for a moment.

    I throw a five gal bucket of brass and about 10 pounds of petco lizard media in mine. I don't use stainless media. I put a piece of blue tarp that I cut to size over the end and use bungees to hold it over the end to keep down dust. I run it on a plug in timer for couple hours. I lube the mixer every load.

    I roll it out of my shed into the backyard and tumble away.

    I run it on a plug in timer for couple hours. I lube the mixer every load.

  5. #225
    Member GuanoLoco's Avatar
    Join Date
    Feb 2016
    Location
    Birmingham, AL
    I’ll refer you to another thread.
    Are you now, or have you ever been a member of the Doodie Project?

  6. #226

    I just put this in the showoff thread


  7. #227
    Nothing in blue, but love my Redding Turret. .44spl/Mag and .38/357m mostly here.
    Attached Images Attached Images  
    https://m.youtube.com/watch?v=uRBvMzKZEFY

  8. #228
    Member SecondsCount's Avatar
    Join Date
    Feb 2011
    Location
    Utah, USA
    Quote Originally Posted by Russ856 View Post
    Nothing in blue, but love my Redding Turret. .44spl/Mag and .38/357m mostly here.
    I have some blue but I want a Redding Turret. A good friend has one and they are great presses.
    -Seconds Count. Misses Don't-

  9. #229
    Quote Originally Posted by SecondsCount View Post
    I have some blue but I want a Redding Turret. A good friend has one and they are great presses.
    #MeToo

    I keep thinking that I need a turret for precision reloading.
    #RESIST

  10. #230
    Quote Originally Posted by LittleLebowski View Post
    #MeToo

    I keep thinking that I need a turret for precision reloading.
    I am Co-Axial curious myself...

    Sent from my SM-G892A using Tapatalk

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •