Page 4 of 4 FirstFirst ... 234
Results 31 to 36 of 36

Thread: Benefits to taking Glock Armorers Courses ?

  1. #31
    Quote Originally Posted by tlong17 View Post
    Are aftermarket mounting plates legal in GSSF MOS division
    Yes, as long as the gun is a MOS gun.

    For instance, you can use an aftermarket ACRO or 509T mount to attach the optic to a MOS gun.

  2. #32
    Quote Originally Posted by professor View Post
    Yes, as long as the gun is a MOS gun.

    For instance, you can use an aftermarket ACRO or 509T mount to attach the optic to a MOS gun.
    Thank you!

    As another example, a CHPWS or FCD plate mounting an RMR/507/etc?

  3. #33
    Quote Originally Posted by tlong17 View Post
    Thank you!

    As another example, a CHPWS or FCD plate mounting an RMR/507/etc?
    I didnít ask that specific question (using a aftermarket plate with an optic that the factory plate set supported) when I was told aftermarket plates were allowed. But, I donít see it ever being an issue.

    Milled slides, No.
    Rear dovetail mounts, No.
    Using a MOS gun without an optic, No.

    The above was from a discussion with GSSF staff before the rules were released.

    FWIW, Iíve ran a FCD mount with a 507C at 5 matches this year.

  4. #34
    Site Supporter
    Join Date
    Sep 2016
    Location
    The 603
    Quote Originally Posted by professor View Post
    I didnít ask that specific question (using a aftermarket plate with an optic that the factory plate set supported) when I was told aftermarket plates were allowed. But, I donít see it ever being an issue.

    Milled slides, No.
    Rear dovetail mounts, No.
    Using a MOS gun without an optic, No.

    The above was from a discussion with GSSF staff before the rules were released.

    FWIW, Iíve ran a FCD mount with a 507C at 5 matches this year.
    Using a MOS gun with irons and the factory blank plate isnít allowed? That seems arbitrary.
    Ken

    BBI: ...Ēyou better not forget the safe word because shit's about to get weirdĒ...
    revchuck38: ...Ēmo' ammo is mo' betta' unless you're swimming or on fire.Ē

  5. #35

    Benefits to taking Glock Armorers Courses ?

    Quote Originally Posted by HeavyDuty View Post
    Using a MOS gun with irons and the factory blank plate isnít allowed? That seems arbitrary.
    No, it is not allowed. There are plenty of other places to run it. But, nothing says you have to turn the optic on .

  6. #36
    Quote Originally Posted by RJ View Post
    That's cool...not that I doubt what you say, but where do/did you get that info? From a GLOCK source you can share? I say this because I've had five Glocks now and they are all over the place in terms of tofs or shoot the dot, and I've had to tune the front sight height to match my preference (shoot the dot) in almost all cases.
    Over the recent years Glock has changed standard sight heights. The standard used to be 6.5mm rear with 4.1mm fronts. Now most ship with 6.1mm rear and 4.1mm fronts. That goes for GNS night sights or polys. Ameriglo Bolds generally ship with .200 front but I have found the .180 to be best for me in conjunction with the .276 rear.

User Tag List

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •