Open Uniform Carry at 1 or 2 o'clock experiences?

[rsa-otc]

If given the opportunity, with any new developments in technology, I'd probably carry appendix, OWB, as long as there is retention other than friction.

With Safariland's new modularity, by mixing a high ride belt hanger/loop you could probably find something that will fit the bill using ALS or SLS.

Adjustable cant.
http://www.safariland.com/hardware-a...oop-23384.html

straight Drop
http://www.copquest.com/safariland-6...er_23-2475.htm

[voodoo_man]

With Safariland's new modularity, by mixing a high ride belt hanger/loop you could probably find something that will fit the bill using ALS or SLS.

Adjustable cant.
http://www.safariland.com/hardware-a...oop-23384.html

straight Drop
http://www.copquest.com/safariland-6...er_23-2475.htm

I've seen those, I don't know if they will work exactly the way I'd like...

[rsa-otc]

I've seen those, I don't know if they will work exactly the way I'd like...

I have the adjustable version and an ALS holster. You can drop by the house and play with it if you'd like. I think with the adjustable loop you can put it on backwards for a reverse cant. The holster is for an M&P but you would get the idea. We could even try a SLS, but the ones I have are for K frame revolvers.

[voodoo_man]

I have the adjustable version and an ALS holster. You can drop by the house and play with it if you'd like. I think with the adjustable loop you can put it on backwards for a reverse cant. The holster is for an M&P but you would get the idea. We could even try a SLS, but the ones I have are for K frame revolvers.

Thanks. I have the plastic adjustable cant piece from a different setup and I could try it.

[voodoo_man]

To share an experience....

I took an le only shooting class recently, duty rig based, and one of the guys had a safariland at 145ish, highride. This is a holster that only required one retention device defeat, the hood, and then a draw and occur. He put up some interesting draw shots, but defeating that retention looked very difficult to do easily as his elbow had to go up in the air every time. Yes a standard aiwb draw is similar but i think with the added retention device and the fact it sat higher than a standard aiwb would (almost at his belly button, if not higher) it seemed like more of a hassle than needed to be.

[Rex G]

With Safariland's new modularity, by mixing a high ride belt hanger/loop you could probably find something that will fit the bill using ALS or SLS.

Adjustable cant.
http://www.safariland.com/hardware-a...oop-23384.html

Thanks for the link to the straight-drop belt loop! I just ordered one, to experiment with my 6360 and 6304 holster bodies. Having just switched to 9MM Glocks, and having just been issued the newer, larger
straight Drop
http://www.copquest.com/safariland-6...er_23-2475.htm

Thanks for the link to the straight-drop belt loop! I just ordered one, to experiment with my 6360 and 6304 holster bodies. Having just switched to 9MM Glocks, and being determined to carry two mags on the belt again, instead of just one, plus having just been issued the newer, larger Taser model, my duty belt is in a state of flux. My duty belt size has not changed since I was a rookie 31 years ago, and I do not want anything behind my back, so real estate is at a premium. Moving the holster forward, from 0300, is an option. I am concerned about the muzzle clearing the holster mouth during the draw, as I have such a short waist and long arms, but I could use a G19 as primary, instead of the present G17, by simply re-shooting the "primary duty" qual course with the G19.