The PX4 Compact might be my DA/SA Glock 19

[busykngt]

With the Mod 2 you're missing the Wilson 12# hammer spring - can be ordered from Wilson for around six bucks and isn't difficult to drop in. And you're missing his trigger job; however the pistol already comes with the Beretta upgraded trigger pack (as noted in the Mod 0 description).


Sent from my Apple thang using Tapatalk

[Terry]

Good grief, I totally missed Mod 3 doesn't have the trigger job.

[LTC77406]

With the Mod 2 you're missing the Wilson 12# hammer spring - can be ordered from Wilson for around six bucks and isn't difficult to drop in. And you're missing his trigger job; however the pistol already comes with the Beretta upgraded trigger pack (as noted in the Mod 0 description).


Sent from my Apple thang using Tapatalk

PX4CC – MOD 2: The Beretta Factory Pistol as defined in MOD 0, PLUS Ernest
Langdon will preform a full trigger job including polishing and hammer sear work.
This Trigger Job dramatically improves the weight and feel of both the Double
Action and Single Action of the pistol.
– Full Langdon Trigger Job
– Reduced Power hammer Spring
$910

Directly from the Robar site

[busykngt]

Yep, my comment was meant for Mod 3 (not 2).


Sent from my Apple thang using Tapatalk

[GhastlyTT]

Discovered this forum while looking for info on my own PX4 compact. Was quite an awesome read from start to finish. I'd spring for one but I already have a PX4 Compact with most of the goodies installed.

BTW - Beretta USA has the Compact Carry site page up! http://www.beretta.com/en-us/px4-storm-compact-carry/

[DGI]

Just ordered a wing'd JM AIWB holster and mag carrier for my incoming Mod4.

Im very curious if this pistol will unseat my trusty Glock 19 from my daily carry position. I really hope it does as the only reason I dont shoot my full size 92s more is because I dont carry a DA/SA pistol.

[LangdonTactical]

I'm still trying to decide between mod2 or mod4, I thought about mod3 but I think that only includes mod0 and the np3 plus finish and does not include the reduced power hammer spring or the trigger job unless I'm reading it wrong.

This ^^^ is correct.

[LangdonTactical]

Better picture of the gun for those that are wondering.

[Bummy425]

I need to change my order, thought the mod 3 had all but extra coatings....should I call Robar direct?

Sent from my SM-G925V using Tapatalk

[alohadoug]

Better picture of the gun for those that are wondering.

I dislike you and this site more and more every day.

But most of my hate is reserved for the politicians of this Commonwealth.