Luckily they have a good return policy, so I printed off a label and sent it right back.
It was bad, like the recesses for the lugs were so undersized to the point the entire plate was hovering off the slide with maybe 1% contact even after trying to tap it in place with a nylon hammer and torquing the screws. Then for the optic, there was a ton of play for the recoil lug vs almost none with the Holosun plate. The screws they provided for one were 5/64” hex vs torx like they say in the installation info and videos, but the screw heads also sat up too high and interfered with the optic sitting all the way onto the rail surface, so even in the pics you can see the rear sat high and to the right basically tilting the optic, also evident with the optics clamps relation to the optic body.
Not only is he "all in", he even changed his name.
Formerly known as xpd54.
The opinions expressed in this post are my own and do not reflect the opinions or policies of my employer.
www.gunsnobbery.wordpress.com
Glock w/a friend
Food Court Apprentice
Semper Paratus certified AR15 armorer