New CZ P-07 = Mind Blown

[Clusterfrack]

Do you guys find the P-07 slide is "squeaky" when you rack it back slowly?

I have a newish gun, CGW Pro kit, yellow recoil spring. Mine P07 does, but my P09's never did.

It doesn't seem to be a functional problem, it just seems weird.

I'm betting it's the spring rubbing on the guiderod. Give the rod a hand job with some oil and wipe off.

[David S.]

I'm betting it's the spring rubbing on the guiderod. Give the rod a hand job with some oil and wipe off.

I'm assuming the same thing. Interestingly, my (guide)rod is already well lubed.

[Clusterfrack]

I'm assuming the same thing. Interestingly, my (guide)rod is already well lubed.

For work-related reasons, I know a bit about friction, lubrication, and stick-slip dynamics (which cause squeaking). These dynamics are strongly affected by the type of lubricant. Using a different oil, or a very very thin coating of grease could help.

[awp_101]

I haven’t gone through all eleventy-dozen pages of this thread so I’ll go ahead and ask. Is anyone running the 07 cocked and locked?

I’m getting close to losing enough weight that I can start thinking about carrying the 07 IWB without looking like I have a growth on my hip. Thing is, I’m also thinking about going 1911. My thought at the moment is if I can carry the 07 c&l there won’t be THAT big a difference in the triggers as I spend time carrying each until I decide which I prefer for full time carry.

Or is that an incredibly stupid though process?

[TicTacticalTimmy]

I haven’t gone through all eleventy-dozen pages of this thread so I’ll go ahead and ask. Is anyone running the 07 cocked and locked?

I’m getting close to losing enough weight that I can start thinking about carrying the 07 IWB without looking like I have a growth on my hip. Thing is, I’m also thinking about going 1911. My thought at the moment is if I can carry the 07 c&l there won’t be THAT big a difference in the triggers as I spend time carrying each until I decide which I prefer for full time carry.

Or is that an incredibly stupid though process?

I did for about the first year I had a P07, since that was what I was used to at the time, and ny other carry gun was a P938.

I never had an issue failing to take off the safety during drills or a match. However, it is very thin compared to a 1911 or even typical CZ safety, so ymmv. The P01 omega does have a wider safety.

[pooty]

finally came across a magwell for the mind blower, but it has to ship from South Africa

anyone up for a group buy? the seller quoted me at $87 ea, with a discount for a larger order + possibly free s&h

@BigT
@vdrielc

you guys know anyhing about these?

the seller (https://www.instagram.com/saedcreviews/) says it'll work with the standard 19,21 rounders but not the 15,17 mags unless you add the shoes.


https://saedcreviews.wixsite.com/mys...flared-magwell

[David S.]

In case anyone cares, my buddy's M&P 2.0 fit perfectly in my JMCK P-09 AIWB holster. I adjusted the tension a bit and it seemed to hold securely with no rattle.

I'm thinking the P-07 and S&W M&P holsters might be cross compatible.

[Mirolynmonbro]

finally came across a magwell for the mind blower, but it has to ship from South Africa

anyone up for a group buy? the seller quoted me at $87 ea, with a discount for a larger order + possibly free s&h

@BigT
@vdrielc

you guys know anyhing about these?

the seller (https://www.instagram.com/saedcreviews/) says it'll work with the standard 19,21 rounders but not the 15,17 mags unless you add the shoes.


https://saedcreviews.wixsite.com/mys...flared-magwell
[img]https://static.wixstatic.com/media/50f414_8afdb6deaf1848c3a7e68ba36ba503ff~mv2.jpg/v1/fill/w_586,h_551,al_c,q_85,usm_0.66_1.00_0.01/50f414_8afdb6deaf1848c3a7e68ba36ba503ff~mv2.webp[/mg]

Woah. That fits the P07? I didn't see the dimensions. I wonder if it would fit in the idpa ccp box. I am interested

[vdrielc]

I don’t know the product and unfortunately they are on the other side of the country so I can pop in to check it out.

I’ll ask on a local sportshooting group.

finally came across a magwell for the mind blower, but it has to ship from South Africa

anyone up for a group buy? the seller quoted me at $87 ea, with a discount for a larger order + possibly free s&h

@BigT
@vdrielc

you guys know anyhing about these?

the seller (https://www.instagram.com/saedcreviews/) says it'll work with the standard 19,21 rounders but not the 15,17 mags unless you add the shoes.


https://saedcreviews.wixsite.com/mys...flared-magwell

[Wheeler]

In case anyone cares, my buddy's M&P 2.0 fit perfectly in my JMCK P-09 AIWB holster. I adjusted the tension a bit and it seemed to hold securely with no rattle.

I'm thinking the P-07 and S&W M&P holsters might be cross compatible.

I got all excited when I read this. I had a buddy that owns both check to see if his P07 would fit in his M&P holster. It did not. The slide on the P07 is much wider.

Now I has a sad because finding production, lefty holsters for P07s is a bit of a pain, especially if one is looking for one that will accommodate a light.