New CZ P-07 = Mind Blown

[Clusterfrack]

I found this posted on a FB group. So awesome. Willy Wonka would totally carry a P-07 AIWB.

[Mirolynmonbro]

We must be part of the same group because I saw it this morning too and saved it lol. The artist has a really cool Etsy store with the artwork for sale

[cheby]

Even Willy Wonka is switching to CO, damn it

[Brianjkeene]

Nice. I’ve settled on the 13# hammer spring because it gives a 6.75lb DA and fires every primer I’ve tried, and will fire military rifle primers on the 1st or 2nd strike.

Which other weight springs are you using In Conjunction with the 13lb hammer spring? Also, the 13lb spring is blue correct?

[Clusterfrack]

Which other weight springs are you using In Conjunction with the 13lb hammer spring? Also, the 13lb spring is blue correct?

Yes the #13 CGW spring is blue. I’m using a 15# recoil spring but the 13# hammer spring may need a 18# yellow recoil spring for ideal ejection with heavier defense loads. I’m using the 0.018” medium sear spring. The 0.020” heavy is good as well. I can’t measure a difference in SA pull.

[Clusterfrack]

Primary Machine threaded barrel. Just for fun, or raccoons.

[Brianjkeene]

Yes the #13 CGW spring is blue. I’m using a 15# recoil spring but the 13# hammer spring may need a 18# yellow recoil spring for ideal ejection with heavier defense loads. I’m using the 0.018” medium sear spring. The 0.020” heavy is good as well. I can’t measure a difference in SA pull.

Think the factory recoil spring could be ran with this setup instead of the yellow and stainless guide rod?

[Clusterfrack]

Think the factory recoil spring could be ran with this setup instead of the yellow and stainless guide rod?

Absolutely. In fact the P-07 with the suppressor in the pic above has the OEM RSA.

Side note: when I installed an 18# spring, I found that the #15 was short by 2-3 coils (after about 5000 rounds). That's probably why it was on the light side.

[Brianjkeene]

Absolutely. In fact the P-07 with the suppressor in the pic above has the OEM RSA.

Side note: when I installed an 18# spring, I found that the #15 was short by 2-3 coils (after about 5000 rounds). That's probably why it was on the light side.

Awesome, thanks Sir.

[David S.]

Do you guys find the P-07 slide is "squeaky" when you rack it back slowly?

I have a newish gun, CGW Pro kit, yellow recoil spring. Mine P07 does, but my P09's never did.

It doesn't seem to be a functional problem, it just seems weird.