Started today with a pretty decent group, but shifted left:
Confirmed at 7yds:
2 Clicks right and re-confirmed at 7yds:
Loosened my grip in an effort to un-do the over-gripping I was doing yesterday and probably went a little too far:
I did some barrel swapping, played with a suppressor, and still ended up with the stock barrel being the most accurate; although this was the best I could do today:
Food Court Apprentice
Semper Paratus certified AR15 armorer
Beautiful range day in Eastern NC.
HK P30 / Lawman 124g / 25 Yards
5 DA (top)
5 SA (bottom)
Shot my old trusty Gen 4 34 with Dawson adjustables today, haven’t completely forgotten how to use irons.
Dang y'all, almost hit that 100.
Food Court Apprentice
Semper Paratus certified AR15 armorer
Got my new carry G19.5 zeroed with the Ameriglo's:
Had a good group going on the previous run, but threw 2. Also, drifted the rear a little right after this before shooting the target above:
Couldn't swing too much with the ACRO today:
And the G45 was hanging right with it:
Food Court Apprentice
Semper Paratus certified AR15 armorer
@ASH556 what Ameriglo sight combo are you using on the MOS gun. I’m considering purchasing one but don’t like how the BOLDs hang off the back.
My posts only represent my personal opinion and do not necessarily reflect the opinions or official policies of any employer, past or present. Obvious spelling errors are likely the result of an iPhone keyboard.
5 rounds at 25yds. G19x, all stock. Yes, there are 4 on top of each other in the 10. No, I could not repeat that or anything like it for the next 4 or 5 tries.
This is the combo I had on the G45 before switching to the Adjustable Dawsons: G45, 648: AmerigloProGlo front (.125W x .180T, GL-212T-180-GRC) paired with Ameriglo Operator Rear (.150 notch x .256 Tall, GL-146R). Hits POA=POI tops of bladed at 25yds (115gr Fiocchi).Originally Posted by DanM
On the G19's I found that the .180 front was forcing me to drive the dot too much, so I ordered .165 tall versions of the same front and that's what you see in the pic above.
Food Court Apprentice
Semper Paratus certified AR15 armorer
Dan, there are BOLD rears that don't hang off the MOS and you can get them directly from Glock but you will need to call. They are not up on their web store. When I initially talked to CS the man I spoke with didn't know about them. When I insisted they existed, (having spoken with Ameriglo) he transferred me to someone who knew. Ameriglo won't sell them directly. When I got to the next rep she knew what I was talking about and was very helpful, she ended up e-mailing me the parts order form for parts available to non armorers they are on there. I don't have the part numbers on hand I'll see if I can find the invoice with them tomorrow if you're interested. If not call Glock directly, they have excellent CS.
Reply With Quote
