Sounds like there are a number of cons to this stock, what are the pro's? Based on past experience with similar stocks on other rifles and shotguns, they aren't much fun with heavy loads.
Sounds like there are a number of cons to this stock, what are the pro's? Based on past experience with similar stocks on other rifles and shotguns, they aren't much fun with heavy loads.
Likes pretty much everything in every caliber.
Interesting. I need to get to the range and give it a go with live ammunition. If it doesn’t happen with live rounds I’ll chalk it up to the shorter dummy shells. I’ll pay more attention to how my hand is oriented during an emergency reload as well. If I can’t make it work, I’ll just drill a hole in the OEM follower.
My posts only represent my personal opinion and do not necessarily reflect the opinions or official policies of any employer, past or present. Obvious spelling errors are likely the result of an iPhone keyboard.
Found this on YouTube!!!
https://youtu.be/3nxPe8iMW38?si=-TIp8TKbyxe35oJH
Gives a lot of insight into the new parts from Aridus and the new features of the g2 1301.
It looks like the mag tube is the same as previous 7 round 1301s but the polymer tube cover is 2 pieces. Hard to tell, but it looks like the heat shield mounts directly to the barrel.
Great, just great Adam
Now I'm going to have to buy a new SGA stock adapter because he updated it to finally fill the half moon cutout of the SGA stock, and he also updated the ZKuhov adapter forend to allow the full M-Lok slot use (I'm assuming with that, I can now use a simple Magpul M-Lok QD cup with screws ground flush on the forend, which is what I've wanted to do all this time as I don't use it on the barrel clamp
I know mine is a lowly gen 1 but adding the Pro Lifter recently and already having the Gen1 latch and shroud and Nordic 1301 Extension kit I may as well keep updating to the newest version, not like 1301T prices are coming back down to the $650 range when I snagged the Arms Unlimited deal around 2018? Before the Gen2 came out
Just take alllll my money, I guess I could sell the SGA stock adapter and first gen Zkuhov handguard affordably (and waiting for him to confirm the new handguards work on all 1301T's which I assume they do)
^^Absolutely will! I'm confident he'll have the updated hardware available for those of us who want to retrofit our existing Zhukov setup - I don't mind buying a new SGA adapter from him since its been improved over the years with an internal buffer and now closing off the half moon on the stock (which is cosmetic I know but the new version will look more finished)
Thankfully, those of us with the Briley handguard already kinda-sorta have a heatshield insofar as the rail segment extends high enough to give you purchase away from the barrel.
Long time listener, first time caller.
@Ben_G - thanks for this insight. Appreciate your input on this thread + YT.
Could you expand a little bit on what makes the V1/Mod2 stock "better" than the V2 from a LOP/texture/angle POV?
Thanks
Okay, so THIS is goddamned insane: https://www.ebay.com/itm/116044583246
As is this: https://www.ebay.com/itm/196195628194
And they’re both SOLD!?!? I picked up mine directly from Beretta for about $60 a few years ago!!! They have them listed on their site for $69 but currently out of stock.