Thanks for the responses guys.
Thanks for the responses guys.
Hi,
I basically drilled a 1/2" hole in the front of the tube and inserted a QD socket. It is then held in place by a nut from the inside. I had to grind the edges of the nut a bit to fit into the tube but then it worked realy fine.
To tighten it up i simply pinched a flat head screw driver between the nut and the tube and used the hex wrench from the outside to turn the QD cup. Below is a sketch of how it looks.
Used the same on the buttstock.
I used a model just like this, just from an european manufacturer (Halder push n go) but the system is identical to the grovtec:
https://grovtec.com/collections/qd-m...98-coming-soon
I just ordered a 1301 Tactical. I’ve been wanting on for awhile now. I’m assuming it’s a Gen 1 because the price was so low.
Roman what is the extension tube you are using in post 3705 above?
Hi Super77,
The extension tube I use is a +2 original from Beretta. It has a steel thread and the tube is made from reenforced polimer. Wallthickness is kind of 1/10" and it feels very solid.
Unfortunately it is not cylindrical and therefore normal clamps for barrel and extension don`t work with this one.
So finally I finished a nice option to mount QD sling and also light in a convenient spot.
I also made a little gif of the making process.
Enjoy...
https://imgur.com/wz5jdNU