Just set up the new Modlite PDW350 on my 1301. PDW350 is mounted on the Nordic components barrel clamp picatinny rail. Unity MLOK HotButton attached to slot on handguard. I dig the set up very much so far.
Just set up the new Modlite PDW350 on my 1301. PDW350 is mounted on the Nordic components barrel clamp picatinny rail. Unity MLOK HotButton attached to slot on handguard. I dig the set up very much so far.
Yes and no. I am corresponding with Rusty, he has been very responsive, and he asked me to take some measurements.
But this is obviously not his full time job, and he let me know he is out of town (or he might be on vacation or something) so resolution will be delayed until he gets back.
I am being very careful not to be some dickhead that trashes someone who is doing something cool, but it looks (to me) like he may have had a batch where there is a dimensional goof on the hole pattern that mates with the Trijicon. Also the things is very low, low enough there was some interferance with the flashing that is from the MRO housing casting. I think mine has an extra special big flashing, and I was willing to alter the MRO housing but many/most people probably do not wanna.
The current situation is don't order one yet, you wouldn't get it shipped until he gets back anyway, and he seems like a good dood that is working with me to get this figured out. Lemme give him time to get in front of this before I post a bunch of pictures and stuff, I have a good feeling he will figure it out. I sure hope so, because the product would/will be exactly what I want and there are really not many other options for the MRO I done went and filed on...
Ordered a +2 Lancer LSX Carbon fiber mag tube. Not sure if they sent me a +3 on accident or if this is in fact how long their +2 tube is? The Lancer tube also prohibits the use of the Nordic barrel clamp as the bottom threaded part is longer than the Nordic or the KZ/Botach tube I was going to replace.
Whatever the problem with your mount is, I’m sure RN will make it right.
I believe there are only a couple of +2 extensions for the 1301T that don't extend past the barrel. When I was in the process of converting my gun to a 5rd magazine there were a couple of posts buried in this thread about the Lancer's length. I might be mistaken but I believe the Lancer is +2 for 3" shells whereas the Nordic and GGG are +2 for 2 3/4 shells.
Anyone find a source for the factory 7 round magazine tube yet?
Freedom Fighter Tactical lists a factory mag tube in stock, but doesn’t designate 5 or 7 rounds. I looked up the part # listed, C59948, and it doesn’t specify.
Last edited by Pnut; 11-12-2022 at 04:02 PM.
Pardon me if this has been gone over already, but what are the differences between the Gen 2 and Gen 3? I didn't even realize there was a Gen 3 until I went to look on Langdon Tactical's site. Is it an inherent mechanical change to the system, or just minor modifications like furniture and mag tube? I read that the difference was just that you could get a 7 round mag tube factory on the Gen 3, and the corresponding furniture to make it 922r compliant. Is that true?
I'm still wrestling with whether to get a 1301 or a Benelli M4.