Search:

https://youtu.be/2MIkXG8DgPw?si=5b2Jnc6V-_MpQxvM

Sent from my SM-S901U using Tapatalk

https://youtu.be/dDfRpNW5YXA?si=up6W7iQADp3LRZUF

Sent from my SM-S901U using Tapatalk

I wanted to bump this thread just to make it a little easier to find in the near future.

I sent the gun and a bag full of parts to Marty Enloe in Phoenix. I also sent him a Prodigy grip that I'd...

Eleven 71 Design has some titanium optic plates available. I assume the EPS or EPS Carry could be used by removing the factory rear sight from the OEM RMR plate. But that's just a guess. Maybe a...

Mine is 99% stock.

My gun has been reliable and fun to shoot. I did have some failures to lock open with the factory 18# spring or whatever it is. The gun works fine now with an Atlas 14# spring...

Well?

Sent from my SM-S901U using Tapatalk

Oh! One thing I forgot to mention is the trigger. The sort of glitch or catch that was right in the first part of the sear movement is now all but gone. I need to put my pull gauge on too. I want to...

I recently loaded 500 of Missouri Bullet Company's K-Ball .452 coated bullets. Weight was between about 233 and 238 grains for the 10 I weighed. All seemed nicely formed and I didn't notice any with...

As is my practice with this gun, I shot it some, picked up my brass, then rounded down to the nearest 10th. This means I fired 250 rounds this morning.

The dot seems to be staying tight but the...

Contact Ruger. See if they will do anything for you.

Sent from my SM-S901U using Tapatalk

More like my lips and his ass. Does Ron care about the daily goings on at SIG? Certainly not in the 1911 line.

Sent from my SM-S901U using Tapatalk

I imagine Texaspoff could texture the factory modular pretty easily.

Sent from my SM-S901U using Tapatalk

Hmm. Is it that hard to pull a couple Romeos off the production line and screw them onto a few 1911s?

Sent from my SM-S901U using Tapatalk

According to info from SIG--the M3 screws should protrude about 5mm below the optic. I haven't pulled the EPS off but I'm almost positive the screws I'm using aren't that long.

Sent from my...

https://youtu.be/7LW0Goh83-Q?si=Nx21Gr_woiyDE_e1

Sent from my SM-S901U using Tapatalk

JEM perhaps? They have several options. Government or commander and then steel or aluminum. Also several barrel ramp options and with or without a rail.

Sent from my SM-S901U using Tapatalk

https://youtube.com/shorts/U3RWBacfJzU?si=BP5MGlEj2f4ZVHIh

Sent from my SM-S901U using Tapatalk

That's the general consensus with all the MAC reviews.

Sent from my SM-S901U using Tapatalk

https://youtu.be/ji_r63lLZgs?si=dsOBvOYbpizybpgZ

Sent from my SM-S901U using Tapatalk

seand1111

Any updates for us? Any additional mods? How's the gun working for you?

If I keep mine I'll probably see about sending it to some place like CHPWS to have the RMSc cut replaced with...

I just got done cleaning the piece. I checked the EPS mounting screws and found them to have just started loosening.

I need to find out what a proper screw length might be. Then I'll either file...

The gun runs. I shot a half a dozen Gold Dots, some old Remington 115 grain JHPs and then a handful of 135 grain hand loads. All told I put 50 rounds through it. One thing funky was my one Atlas mag...

70 additional rounds fired today. The gun continues to run fire. Ammo today was some old 200 grain LSWC reloads, some hardball and some more 200 grain Berry's HHPs.

One thing of interest is that...

My two budget 1911 hicap guns.

The Apollo is a little tighter overall than the MAC. The trigger is lighter on the Apollo at just under four pounds but it feels a little spongy. The MAC is crisp...

My two budget 1911 hicap guns.

The Apollo is a little tighter overall than the MAC. The trigger is lighter on the Apollo at just under four pounds but it feels a little spongy. The MAC is crisp...