On the OEM FPS, you could move it when locked into place with a punch and it moved loosly when the FP and Spring were removed. In comparison, the EGW is tighter than a vault with the lockup. Just...
Type: Posts; User: Wonder9
On the OEM FPS, you could move it when locked into place with a punch and it moved loosly when the FP and Spring were removed. In comparison, the EGW is tighter than a vault with the lockup. Just...
I think Trooper224 was on the money because the FPS was pretty loose in it's pocket. I ordered an EGW oversized FPS and fit it. Since it was my first time fitting a FPS, I took slightly too much off...
9mm 1911
Beretta 92X or Vertec
Hi-Power
CZ-75B/CZ-75SA/SP-01/Shadow2 along with thin grips in Condition One.
Sig P226/P229 with an E2 grip and SRT.
The only polymer handgun that I think has a...
After yesterday's range trip, I decided to do some tinkering on the B9R. I adjusted the sear spring to get the trigger down to 3.5lbs and took some tension off the extractor. Went back to the range...
Mini Review: Tisas Duty 9mm w/ 1913 Rail (B9R)
So a trip to a gun shop for a H2 Buffer turned into a Tisas B9R. I wanted a Govt model in 9mm since I have a Govt in 45 and Commander in 9mm. I was...
Went back to the range today since I got some free 1997 production Win M882 that was corroded as hell from sitting in a covered barn for 20+ years. Some had black corrosion so bad, they would not...
No, ID on baseplates:
USGI-style are Mec-Gar 9-rounds
Standard size polymer base plates are the Checkmates
Largest polymer base plates are the Mec-Gar 10-rounds
I really like the 10-round...
Finally got the Commander out to the range again today. I ordered five 9-round Mec-Gars and two 10-round Mec-Gars to go with the two OEM Checkmates. Shot 209 rounds of Magtech/S&B/Prvi through it. No...
So I jumped into the 9mm 1911 pool this weekend.
117082
First 9 rounds of S&B 124 at 15 yards. I guarantee any of y'all could have kept them all on the bulleye.
117083
Ran 150 rounds of...
I hit the 250 round mark on my Service model yesterday and it's been running like a sewing machine. I know the number is really low for P-F Standards, but it's been a nice journey so far. Plus no...
I bought the basic "Service" Govt. model last week and finally got it out to the range today. Put 150 rounds of Magtech and S&B FMJ through it with no issues and ejection is textbook. Quite frankly,...
I highly recommend the Hogue Rubber Grip Panels (not the wrap-arounds with finger grooves) for thin grips.
I've been using the Calculated Kinetics plate since it stops LCI blowback. Only have about 250 rounds with it on, but it's been good so far even with a lower 1/5 co-witness. Just recently got my JMCK...
I don't know what kind of sadomasochistic drills y'all run, but I'll stick to more conventional training methods.:D
The reasons rethinking the Airweight are pretty simple; the wife hates shooting...
So I picked up a Glock 42 to replace my 442 because my accuracy suffers too bad past 15 yards. My friendly LGS had one and it had the latest -3 magazines, so I picked it up. I had a box of pre-2020...
Sig P229 for hammer-fired
S&W M&P 2.0 w/ new trigger dingus for striker-fired.
113981
Got mine this weekend for my P30S. Like it so much, ordered one for my wife's P30S. Highly recommended.
Steyr M9A1. Did absolutely nothing better than a Glock, sights are terrible, and miniscule aftermarket.
Beretta 90-two. Hated the grip module and parts incompatibility. It did shoot good in...
FWIW, I picked up another 2.0 Compact thinking the first one was a fluke and was an exceptionally accurate example from the factory. At first, I thought I was right because my shots were all to the...
S&W Shield Plus.
Completely replaced all my carry guns with a brace of Shield Pluses, and the 15 round magazines could easily make it a primary pistol if needed.
Runners Up: Gen5 G19 or M&P 2.0...
This thread is even more stupid... how stupid good this M&P shoots. First 50 rounds @ 15 yards cold. Outliners are 100% me finding the where to hold for sights during the first magazine. Even at 25...
When I bought it, I didn't need another Shield Plus, but they were on sale for $339 + the $50 rebate from Big Blue. Can't beat a $289 Shield Plus, even considering the cost to get it milled for a...
This thread is stupid because had a Gen5 G26 MOS in hand, but I walked out my friendly FFL with this instead. Trigger take-up is kinda gritty, but the wall and reset is super nice.
112156
The 10mm marketing campaign is just a way to sell all the unwanted .40S&W components.
I shoot the Gen3 17 significantly better than the Gen3 19
With the Gen4/Gen5, I shoot the G19 better than the 17/45.