One thing I constantly have issues with regarding 'picking a small spot' is that often times at the range, I'm shooting a shaded IPSC that has no spots to focus on. A lot of times it's a single flat...
Type: Posts; User: Olim9
One thing I constantly have issues with regarding 'picking a small spot' is that often times at the range, I'm shooting a shaded IPSC that has no spots to focus on. A lot of times it's a single flat...
This might sound extreme but if one struggles so much with dots that they need to occlude their duty optic, I think they should stick with irons. I think people make red dot shooting way more...
Had my main P10C go down a few months ago after it had the tip of the striker break off which I was carrying for a week without noticing. At that point it was at about 1,000rds. I replaced it with a...
I cleaned all of my brass with citric acid when I wet tumbled it. The insides aren't squeaky clean but this is probably the issue. Ordered some imperial sizing wax to dab on the funnel and if that...
I have a Dillon 550C with the standard powder die setup. Using brass other than Federal, Speer and Winchester, I'm having cases that really need some force on the upstroke and the resistance is...
In my experience across 3 different GL-429 rears, they all walked on a Gen 4 19 rear and an aftermarket dovetail. Dawsons stay on them, I want to like Ameriglos but it does happen. I do have good...
I've seen blown primers make someone's rifle go down hard using Hornady Frontier ammo. I was even seeing primers seperating mid flight from the brass. This was also when I saw the same thing occur on...
ta
I prefer the 48 over shooting the 43X and 365XL. I found the XL to be too snappy for my taste and I'm not a fan of the 365 triggers, at least the ones I've handled. The slimline Glocks aren't for...
Regarding plates and helmets, the only issue I can see is if it gets to the point where wearing it at a match degrades your performance/concentration. I haven't been to a match in years but I...
Not at all. Almost every time I see one of those "irons don't fail" posts/videos on social media, a majority of them are rears on the suppressor height Ameriglos. If a sight goes in easily, generally...
I've had numerous GL-429's walk out on OEM and milled dovetails. I like Ameriglo as a company but their dovetails are way too loose and they need to fix that. I recommend Dawsons.
No clue but from various sources, it's apparently a G43 in an Incog holster
https://www.amsmachine.net/product-list/rails/
Look down for A-3011.
I find the Brig slides to be needlessly heavy for defensive use. It may have some advantages for higher levels of shooting but quite honestly I would prefer a standard 92 slide. The couple times I...
"Fuck off and die" because one (knowingly) violated an arbitrary and non violent federal firearm law. I can understand someone being otherwise compliant with such laws but that post is just fucked up.
91476
From the 60's if I remember
Been meaning to give this one a try.
https://youtu.be/H_587rrdiwY
Target / Time: SR42 / 2 minutes
Start at 100y, run to 200y. Prone 2 rounds, Run to 100y, kneeling 2 rounds, Run to 50y,...
I'll try it with a drill but I've been using the Frankford Arsenal prep station with an RCBS crimp remover with no luck.
As for sorting by headstamp, I have a bunch of Lake City brass, some...
Planning on loading a lot of .223 and I'm looking at the Dillon 600. Is there any way to adjust the swager so it oversizes the primer pocket? I've already loaded a couple hundred rounds of 9mm with...
I'm surprised adjustable RDS specific rears aren't a thing. Looking at some adjustable rears I have from Dawson, it wouldn't be impossible to make at least for irons rear configs.
https://fenixstore.de/SureFire-MR11-Adapter-Mount
I ordered from them a couple years ago for the same thing on my 226.
I'm used to shooting Glocks with skate tape where your support thumb rests, does anyone else find it tougher to consistently apply pressure on that are with Sigs? I think that along with the 'high...
I've had good luck with two of mags when Shield Arms was releasing them early 2020. I forgot the approximate round count but inbetween those two mags well over 7,000 through it, they worked well in...
Its the only powder I've ever used but 3k rounds of 9mm loaded, I'm happy with it. I'd just like more load data like TG has but I know it's a fairly new powder.