Search:

Tier1 Concealed also sells their EDC-S Hunter Constantine collaboration belt which is a very similar belt but with one extra quick adjust loop and more overlap between sizes, though T1C only sell two...

Yeah, I also noticed that little hitch on my new GPTs when they are first installed. On my triggers that hitch has gone away with use.

The Overwatch NP3'd connectors paired with their Falx...

The GPT releases the striker lug with approximately 0.050" more travel compared to the standard Glock trigger assembly, so all else equal you should be getting stronger primer strikes with the GPT. ...

I put a couple thousand more rounds on my GPTs and to date they are all have run perfectly. Based upon comparison pictures, I believe all my GPTs to be the latest revision, although they aren't the...

Here is another late 2023 GPT that has never been cleaned with nearly 2k rounds. It is still extremely smooth, even more so than my nearly unused GPTs. Not sure how many rounds you have on your old...

I don't recall if they came with a leaflet, but the box had a notice along the lines of "4lbs, does not meet NIJ standard for duty use". However, all my GPTs pulled almost right at 5lbs when...

Thanks for the pic. Here are a couple of my late 2023 GPT #70272. At least to my eye, they look just like your #74332.

115250

Interesting indeed. All of my GPTs were acquired new in late 2023 / early 2024, so if there was a rolling revision it appears to have occurred recently. The trigger bars in my GPTs are labelled as...

Are you able to post a side by side pic of the old and new GPT? At least the visually verifiable points you listed like stippled trigger bar and yellowish finish hue are present on my GPTs with the...

I have six GPTs with the original part #70272. A new Glock with a new GPT #70272 pulls right around 5 lbs on my scale, so I am not clear if Glock increased the return spring strength on the new part...

The GPT is not being discontinued, but the part numbers have changed and the new part "Performance Trigger For Glock GEN 4/5" includes a Gen 5 backplate for use in Gen 4 pistols.

The old Glock GPT...

The CORE system design uses a single set of fasteners across two sets of bosses on two planes. This design means cumulative tolerance stacking occurs across the slide to plate interface and the...

I completely agree. While the CORE the mount design allows for adapter plates with recoil fences, the plates themselves do not independently secure to the slide so the fences do not sufficiently...

Related to the OP, here is how a hydrophobic wax treatment affects fogging on both open and enclosed emitter optics:

RMR completely untreated (left) and RMR with wax treatment on emitter window...

In my experience most wax or paste products work well, but liquid products don't leave enough hydrophobic film to be effective. EK Products makes a wax product that works well and is widely...

To clarify, I also coat the emitter lens with wax treatment as well. In addition to filling the main body with water, I submerged the lenses in water as well, but most of the water immediately runs...

Thanks for posting. Actually testing gear leads to insight.

Here are some pics with an RMR with a hydrophobic wax lens treatment.

1. RMR with lens treatment and drain holes taped and filled to...

In my testing, while not as bad as the DPP, the SRO is highly susceptible to dot dispersion from light rain, even after hydrophobic lens treatment. On the other hand, I can go for a swim with an RMR...

100% this. Here are some things I learned from testing pistol RDS in water, rain, humidity, extreme temperature transitions, and sub zero cold.

1. Not all open emitters are equal. Some, eg the...

The OZ9 mag catch gouges Magpul Glock mags in the same manner. I am not sure why these companies don't use polymer on the inner portion of their metal mag catches to eliminate this.

I agree. I run the Ameriglo GL-429 (aka XL) with the RMR and the GL-470 (aka 2XL) with the SRO. However, the DPP deck height is significantly taller than the RMR, so he'll need the Ameriglo 8XL or...

Good point. On the other hand though, I can see the appeal of sidestepping all the historical baggage associated with 2011 magazines and running on a well established dedicated 9mm pattern magazine...

Its been awhile since I setup a Glock with a DPP, but IIRC a lower 1/3rd sight picture requires roughly a 0.480" front sight on a direct milled slide and 0.500" on a MOS slide. There are not a lot...

The OZ9 V2 uses the same chassis as V1. I have only found two differences between the V1 and V2, the first difference being a design difference in the slide and the second is just a build...

The C2 barrel is 0.4" longer than the CS. I think the largest jump up in barrel length as you progress up the Staccato lineup is only 0.6" between the P and XC. Seems small, but additional barrel...