Search:

This is a great thread-both for the OP in his query and for the rest of us already on our journey.

If you perceive a significant requirement of carrying and using a gun (presumptively on duty) as...

Too obvious for me to ignore.....#6; VCD Grips complaining about sharp edges???

Tongue in cheek, David-your grips are great, and you are including sandpaper with 'em to knock down the crater edges...

To those new to the discussion here, this is one of those threads that you'll immensely benefit from by reading through it in its entirety before jumping in and commenting on. We've had some very...

The key things now seem to be:

1. Determining is the P320 is a pre-2019 gun;

2. If pre-2019 (and arguably, pre 1 June 2019) has the gun had the VUP performed;

3. If its had the VUP...

The Colt 1911 Ayoob was using as an exemplar was literally a 70 Series Colt 1911-not the 70 Series Reproduction (which was, and still is an excellent gun, but Colt morphed it into the current...

Pretty decent video. Today, it would have had arguably more relevance if Ayoob had used, say, a basic current Colt offering, like the current 1911 Classic, or one of the more basic Springfield...

I concur with what's been commented so far; it appears to be a late production organizational order or organizational order surplus. It appars to have the later-production slanted receiver dustcover...

I had way more than 2 non-ignitions with the contemporaty 145 gr .357 Silvertips. I offered them the opportunity to send me a larger quantity to test, and haven't heard back. I'm simplhy...

I was really unimpressed withj how current production .357 Silvertips ran; I had far too many light strikes with it with my Ruger GP100, with a full strength factory mainspring. I've switched to...

Too little information from us to glean much; key things: Date of P320 production, had the gun undergone the VUP if applicable to production date, holster used?

Best, Jon

I've tried it and am impressed; currently running it on my Gen 3 G21. Definitely assists in running, better than nothing at all or with just a mountain bike inner tube segment. Another tip I had...

I had a P229 DAK, one of the "first issue" ones with the lighter spring (apparently some break-in was required, which irritated enough purcharsers/organizations that SIG issued a heavier spring and...

Nice write-up. We haven't heard much from Tam here recently. I hope she's ok, and hasn't become p-f jaded.

Best, Jon

That's a pretty impressive video-both in terms of message, product, and use. Much more in-depth than most advertising.

This gun could be a viable consideration for my wife with it's 20% reduced...

That makes a lot of sense, both for crafting the grip setup to your hand, and taking advantage of the plunger tube support provided by the standard left panel.

My thought is that when HK went to...

That makes a lot of sense, both for crafting the grip setup to your hand, and taking advantage of the plunger tube support provided by the standard left panel.

My thought is that when HK went to...

I have a set of Hogue G10s for the 1911. They are exceptionally grippy, and aesthetically quite nice-but for overall grippiness, I found the VCDs are a bit better, and I really like the thumbresat...

Feeling the burn/scorch..... :-)

No disagreement over the concept or the schizophrenic approach/appearance....It'll be interesting to see how (and if) it tangibly works for me over time.

Best,...

It's an ambidexterous magazine release lever, developed by former senior FN engineer Leon Hubert and sold by BH Spring Solutions. It's easily installed, and operates as a lever system. In actual...

In the grips that I've experimented with over time with my 1911s, the two that really stood out for me were the VCD thumbscoop model and the BH Spring Solutions walnut Master grip. While the VCDs...

In the grips that I've experimented with over time with my 1911s, the two that really stood out for me were the VCD thumbscoop model and the BH Spring Solutions walnut Master grip. While the VCDs...

I strongly suspect that the relative increased weight and bulk had to do with the ability to relatively seamlessly move from a steel/aluminum frame to a polymer one, with little to no receiver...

Much as I like my revolvers-all Ruger-GP100, Security Six and Blackhawk-and thoroughly enjoy shooting, competing and carrying them, they'll likely never displace semi-autos for me.

Several...

I believe I was aware of it, or at least the possibility, but I don't recall actually seeing one in the wild. I'm wondering if it was the result of, or an overrun from an organizational order. That...

Obviously I'm highly biased, but the 92D is a thing that Beretta just got right. Judicious sipping at the LTT and Wilson Combat wells significantly embellish an already excellent pistol. Any of us...