I wanted to give an update on this... even after the charges got reversed on my credit card, and I told DWS that I reversed the charges, they STILL sent me a plate. Of course, I was so disgusted...
Type: Posts; User: BrazeauRacing
I wanted to give an update on this... even after the charges got reversed on my credit card, and I told DWS that I reversed the charges, they STILL sent me a plate. Of course, I was so disgusted...
I've been carrying, training, and competing with either of these three for the last 6 months. HS509T direct milled or an SRO on a Zev optic cut slide are my current go-to optics these days because...
I got the charges reversed via my credit card company. Then, a month and a half after I placed the order, DWS emails me to ask which optic I wanted the plater for. 🤦
I already had to send my Fastfire 4 in for warranty replacement due to the dot moving to a new place in the window with each shot fired. I'll be really happy when Springfield starts shipping the...
Still no reply or call back, so I've submitted a charge dispute with my credit card company. :(
I picked up a Prodigy 1911 DS 4.25" recently, so I'll just pick up a 509T plate for that when they...
Nothing, and not looking good. DWS won't respond to my emails requesting an order status, and calls to their customer service number just go to voicemail with no call backs. At this point I would...
Unfortunately I have only received an order confirmation email. My guess is that they only make these when ordered, so it is probably in the queue for milling and then will get sent out for a DLC or...
Will do. Just placed the order. Now to decide which gun to put it on...
Also... Remington R1 double stack mags can be modified to work in the gun, but due to the slop in the mag catch with the modified opening, they won't lock the slide back with 100% consistency, so I...
I have a Gen1 Bul Tac Commander, and I can confirm that there is not a readily available front sight for their dovetail cut. I did some research and was left with the impression that a front sight...
I did not know that this plate existed, so thank you! I sent an email to DWS to confirm that the plate will fit a 1911/2011 slide that has already been milled for a Trijicon RMR 1911/2011 plate, and...
I have 3 Brownells RMR cut slides (two G19/3 and one G17/3). I recommend getting the Gen 3 slide and using a Gen 4 frame gap spacer/adapter so that you can use the slide on a Gen 4. If you get the...
They have done two STI/Staccato slides for me with the Trijicon 1911/2011 RMR plate and a 3rd 2011 slide is currently in their hands for the Trijicon plate/cut plus their new StaccPorts. I highly...
I just picked up some 1/4" pin stripe tape off eBay. The adhesive properties of the tape isn't that great, but once it's covered with the clear fingernail polish, it doesn't move. I've only had to...
This is what I've been doing to all the tritium front sights of my guns (with or without RDS):
https://chuckbrazeau.blogspot.com/2017/12/diy-high-visibility-front-sight.html
It's very easy to...
I went with the G19.5 MOS specifically with the plan to use the C&H Precision Weapons System V3 mounting plate. The RMR sits slightly lower on the slide, and the plate has more thread engagement for...
Sorry...
C2 grip width is 1.290"
G19.5 grip width (not including the magwell flare) is 1.185"
The C2 grip is longer than the G19.5 by about 0.325" but its bottom angle is different so its longer...
C2 with the RMR and no WML or mag: 1 lb 11.9 oz
G19.5 with the RMR and no WML or mag: 1 lb 6.0 oz
It is a little bigger than a Gen4/Gen5 without a full length backstrap installed, but it is similar to my Gen3 RTF2 grip.
I sent the slide to Vulcan Machine Werks in Plano, TX. They have a "Staccato" package which includes the Trijicon 1911/2011 plate and matching front sight, fitting of the new front sight, and...
I picked up a C2 and sent the slide off to have it milled for the Trijicon 1911/2011 RMR plate because... it was cheaper to go this route vs the DUO version and included tritium sights, the RMR sits...
https://www.instagram.com/p/BT2kQsPgirA/?hl=en
It appears to fit a P-07 perfectly, which is awesome because the one I ordered for my P-07 will be here on Thursday. :-)