Search:

https://www.thefirearmblog.com/blog/2021/03/29/fk-brno-psd-review-accessible-hand-cannon/

Here's a mostly very positive review.

I find myself increasingly interested in this gun. 2020/2021 has...

Wow, mine sure doesn't look like that. I would think LTT would be willing to send out a new rear sight/rmr plate.

Agree on the BUIS height, wish it was 1/8" or so lower, but it is basically the...

I disagree. As an example, I bought a Primary Machine P09 Deltapoint slide from a forum member here and had to use a rubber mallet to coax the Deltapoint into place. That gives me the warm and...

Very sorry to see this news. The P09 I had done by them is excellent, and a good value when you consider the free cerakoating.


A definite loss for CZ shooters.

Did you remove the decockers from the slide, or replace them with a more flush alternative? Very interested to learn more if so.

A 92D Compact or Centurion built on an LTT or similar lower is...

After reading this whole thread, I'm highly certain the OP's original hunch is the best choice for him: 3" GP100. Plenty durable, easy to work on if needed, low recoil, reasonably concealable....

The advantage to the extended firing pin is it allows you to use much lighter hammer springs and still reliably touch off hard primers. If you are fine with the DA weight as it comes there is no...

If I were looking for the "most durable revolver" the exact model you posted would be a great choice.

Another to consider would be a fixed sight SP01, if you can live with one less round.

I'm guessing the backplate came off first. Could be it was machined too small and not snug in the slide, or could be the guy assembling it didnt push it all the way up into its recess. Either way not...

That is seriously cool. I wouldn't even have to buy a new gun since I could use my G43...

If reviews are good and holsters are available I will likely try one of those.

Hi all,

Anyone have a lanyard loop 92 mainspring plug they would like to part with? I want one for my LTT to make switching out hammer springs easier.

I would also be interested in a stock...

For me There is no number, in part because trigger travel length is at least as important as weight.

The stock glock travel length and weight (5.5#) is juuuuust enough to make me feel "OK," and I...

No doubt they will sell a boatload, especially at that price point. A pistol in this size/capacity niche from one of my favorite gun companies piques my interest, but the 3.25lb trigger and the...

https://www.opticsplanet.com/truglo-tritium-pro-night-sights-cz-75-tritium-green-tritium-w-orange-outline-fr.html

I'm not a fan of the U notch rear but this front sight looks perfect. Might...

Absolutely. And make it a reasonable weight for a "practical pistol" in PROD/CO. like 6lbs for DA's and 4lbs for strikers



You dont need to worry, that is not happening ever. However, it would...

As someone who considers himself a timmie, I really like these rule changes.

The only gun specific OWB holsters I have are light bearing. Why? Because if Im going to carry a gun OWB, Im gonna...

For serious use I run it in manual mode, I just dont trust a computer sensor to do what I want personally. On my .22 I leave it in auto mode and it has been good to go on all range conditions I have...

Last weekend I was at the range shooting my Holosun 407CO (8MOA ring) as the sun was going down. The sun was directly behind me and at the worst possible angle.

I got an artifact that looked kind...

I have been using the 22lr conversion kit a fair bit since I wrote the above post. I first sent it in to Beretta because of the light strikes. They replaced the firing pin but after testing it again...

Could you post a link to back that up? I'm open minded. Last I checked Springfield used their lobbyists to write/support a bill that eliminated all potential future competition, i.e. all firearms...

Interesting they specify the pistol manufacturer must also supply (I assume that means manufacture themselves?) a suppressor. That by itself basically gives the contract to SIG, as I don't know any...

If that is indeed the case across the board, that is unfortunate. I say this because the manufacturers are the ones I would want to take home the lion's share of profit from this craziness, as the...

I dunno about a consensus, but that sure is my gut feeling. I wish more manufacturers would bring out guns in this class of size/capacity. Right now my choices are a gun with a different grip angle...

Really well done video. Would be nicer if they did away with the ambi mag release and the huge beavertail, and nicer still if the sight dovetails were compatible with something more popular.

In a...

Possibly interesting. Is that 20 oz with or without a mag?

What happens if you put your thumb over the hole in the backplate and pull the trigger?