Search:

They have been out since last summer, I believe.

Just installed the Armorycraft extended safety. First thoughts, paddle size is much better than the factory safety. The front edge of the safety is sharp and
feels like it might cause some...

RJ I have medium large hands as well. I bought all 3 of the Fdez straps. I expected the #2 to be the one I liked, however the #3 was what I ended up using. As has been said I didn’t find a lot of...

That was exactly my observation. You just said it in a concise way. 🤣

I run the Fdez number 3 on my two Macro framed 365’s. I bought all 3 Fdez back straps and
prefer the 3. I don’t notice much difference in the large Sig and the Fdez 2.

Been carrying a X-Macro in a JM AIWB for most this year. Very happy with it.

Stealth Arms website says that the Platypus maintains the 1911 grip angle of 17.5 degrees in its faq’s.

I installed the Sig safeties on my P365 Macro. I used a new grip module with the safety cut from Sig. Whole job
took about 10 minutes tops, with no issues. A extended safety might be welcome as the...

https://www.1911forum.com/threads/how-to-remove-the-ils-with-pics-part-numbers-descriptions.135279/
This should help.

I prefer the arched mainspring housing to the flat. The arched was the standard since with the adoption of the 1911A1 in 1926.
The flat mainspring housing was used on the 1911. The flat has become...

I bought it roughly a month ago as a blem (although I’m not sure what is blemished). I mounted it up
on my Ruger MKIV so I’ll just leave it there. I only spent 120 or 30 bucks on it as an...

I was lucky to have the parts lying around to test. I ended up just putting the RS10 on my Ruger MKIV and
I’ll save the Holosun 507 for the Prodigy when the plates become available.

Seems the thread on the plate is 6-48, however a 6-48 won't fit through the optic body.
Optic seems to be a 3mm hole for mounting. Looks like I will Have to wait for the RMR/Holosun
plate to...

I'll check those as well. Thanks.

Wrong diameter, screws drop into the plate. The plate is supposedly for a Fastfire foot print.
I looked up screws for that and ordered a set. Keeping my fingers crossed, if I get a chance
I’m...

The screws that come with the RS10 will not work with the Prodigy's plate. I guess I'm now on a quest to figure out
What screw I need to make this work.

I did not, I believe the Holosun/Trijicon plates won’t be out until October. I was under the
impression that the Prodigy comes with a plate for Springfield’s optics which I thought might
fit the...

I bought one to use on an older Glock 17 slide which has a doctor III. The RS-10 doesn’t fit the cut.
I ordered a Prodigy yesterday so when it shows up, I thought I might give it a try until I get...

Proven outfitters usually has good prices on Sig mags. They have a pretty good break on 3 mags.
Not sure about the manufacturer of the 365 mags. I have ordered several P320mags from them and ...

Older Springfield 1911's had a more squared off (larger) grip than Colts as I recall. I believe Springfield Armory
changed to the Colt dimensions though not sure when. My old single stack S.A....

GJM don’t know if you found it
https://www.mapleleaffirearms.com/customize-your-slide/glock/glock-19-23-32-19x-45/
They have angled and straight stand alone front serrations.

I had Maple Leaf do a early Gen 5 Glock 17 that didn’t have forward serrations, with one of their duty packages and nitride finish.
Their work looks great and they delivered slightly ahead of their...

S&A arched mag well mainspring housing https://dawsonprecision.com/magwells-1911-by-smith-alexander/
or
https://www.edbrown.com/product/magwell-housings/
I have the Houge grip mag well combo Chuck...

https://sks-files.com

I think this is forum I used a year or so back looking for info on my Russian SKS.

Voted none of the above, as I recently switched to a Glock 43X. I need to order a SCD for it.
Never thought I would carry it instead of my 19. I bought for backup gun matches, but it’s so...