EDC Leather Key Fob Crowdfund Campaign

Hey everyone! Most of you know that I make a lot of other leather items besides holsters. I try to make most of my leather with EDC in mind. I came up with this cool folding key fob that is a nice alternative to the techy ones that become as big as swiss army knives. This one will typically fit in your jean's coin pocket with 2-6 keys. A couple of PF members already have ones reserved that have bough wallets.

Please take a couple of minutes to check out this EDC Fob and support the campaign if you can. If you could also be kind enough to share the campaign on any social media you have, it would be greatly appreciated! If enough people share it by using the share button on the campaign, I can probably get it featured on Indiegogo's main page, which will be a real boost.

Thanks in advance! Jim

https://c1.iggcdn.com/indiegogo-medi...jjem0jwidp.jpg

Can you provide some more detail? Why does this need crowd funding? You are already a leather worker.:-)

What are the guts? Is it more than a piece of leather with two screws?

I love the way it looks, but my keys are few, and they are much bigger, which is why I have stayed away from the techy ones.

Challenge is that all my vehicle keys are huge - do you have a version to use with the monster vehicle key monstrosities?

The main reason for the crowd funding is to buy multi-cavity clicker dies and hopefully a new press(which will be helpful for all production. The brass hardware is made in special sizes and comes with serrations, allowing you to get a snug fit, without over tightening or loosening. Inside it uses a spring wave washer to keep tension on the keys as well as pressing against the leather to keep the screws tensioned. There are spacers to allow for uneven amounts of keys or large long keys on either side. I am also working on a metal clip that will take the place of one key that you can attach your car remote to as well, this will come standard. I have but my car key on one side and house keys on the other side.

While I can easily make these in small quantities in my regular ay to day leather work, there is no way to produce them efficiently or buy the sizes of hardware needed, except for quantity. This is my first jump to expand into more production work with the leather goods, be it fobs, wallets, holsters or belts.

BTW, the picture in the first post is a clickable link to the campaign. Here is the link address as well - https://www.indiegogo.com/projects/j...hide-key-fob#/

What color is the one in the pic in the first post?

Quote:

---

Originally Posted by dsa

What color is the one in the pic in the first post?

---

That is Cordovan / Burgundy. It is a little on the dark side in the photo.

I like it!

Quote:

---

Originally Posted by dsa

I like it!

---

Thanks for your support on this project!

I'm in for a keyfob, and will pass the word.

Quote:

---

Originally Posted by SeriousStudent

I'm in for a keyfob, and will pass the word.

---

Thanks so much! I appreciate the support!

Quote:

---

Originally Posted by JRCHolsters

Thanks so much! I appreciate the support!

---

Can you organize this mess with this campaign?
https://uploads.tapatalk-cdn.com/201...00d7f0da03.jpg

Sent from my SM-G930V using Tapatalk

Quote:

---

Originally Posted by BaiHu

Can you organize this mess with this campaign?
https://uploads.tapatalk-cdn.com/201...00d7f0da03.jpg

Sent from my SM-G930V using Tapatalk

---

LOL, Yes I think we can make that a much tidier package!

Quote:

---

Originally Posted by JRCHolsters

LOL, Yes I think we can make that a much tidier package!

---

Which one would you choose for that monogrammed.

Sent from my SM-G930V using Tapatalk

Quote:

---

Originally Posted by BaiHu

Which one would you choose for that monogrammed. Sent from my SM-G930V using Tapatalk

---

They all come with sets of hardware that allow for different configurations. Any would work for you, just depends on your choice of hide.

I'm interested to see/understand how this works with a big car key fob. I can't envision it being streamlined.....?
Thanks

Quote:

---

Originally Posted by ubervic

I'm interested to see/understand how this works with a big car key fob. I can't envision it being streamlined.....?
Thanks

---

The Car remote/fob attaches to a hanger that comes with the leather fob. The current prototype hanger is leather, I am working on some titanium ones to come with the production model. The car key itself can fit inside the leather fob. I will snap some pictured later today and post them.

Quote:

---

Originally Posted by JRCHolsters

The Car remote/fob attaches to a hanger that comes with the leather fob. The current prototype hanger is leather, I am working on some titanium ones to come with the production model. The car key itself can fit inside the leather fob. I will snap some pictured later today and post them.

---

Looking forward to it, as this information will go a long way in sharing it with friends.

I'm interested too, since beside my 4 "can't do without" keys, my suspended pocket junque (on quick-detach fasteners) includes a big round electronic car key, OC spray, fingernail clipper, and a AAA flashlight.

Quote:

---

Originally Posted by SAWBONES

I'm interested too, since beside my 4 "can't do without" keys, my suspended pocket junque (on quick-detach fasteners) includes a big round electronic car key, OC spray, fingernail clipper, and a AAA flashlight.

---

While the round key may fit with the opposite side loaded with other keys, not sure if that wouldn't be better attached to the spare hanger. The other stuff..... well not so much.

Some quick pictures I took this morning. Excuse the quality. I used what hardware I had on hand to get the point across. There are a couple of post sizes that will come with the production model, allowing for more keys to be stacked.

My everyday keys
https://scontent-sea1-1.xx.fbcdn.net...c5&oe=58E001D6

The keys in the new fob. I attached the car key to the hanger. It will fit inside, but I don't like the thick plastic.
https://scontent-sea1-1.xx.fbcdn.net...78&oe=591D571B

Popped the plastic off my spare car key and punched a hole in it. All keys in the leather fob now.
https://scontent-sea1-1.xx.fbcdn.net...57&oe=58E13CD1

Nice and thin and easy on the pockets
https://scontent-sea1-1.xx.fbcdn.net...47&oe=58D98667

So, if you have looked at the campaign, you will see this is to be a streamlined alternative to some of the tech type fobs that can hold a ton of toys. While this could as well, it is not the original intention. It won't work for everyone. With the largest post, it could hold the equivalent of 5-6 keys on each side.

Pretty cool. Thanks for the photos.

Like the concept yet not sure it'll work for my assortment of keychain items. Will keep thinking.

Quote:

---

Originally Posted by ubervic

Pretty cool. Thanks for the photos.

Like the concept yet not sure it'll work for my assortment of keychain items. Will keep thinking.

---

Yeah, it is more of a key holder. That said, besides the titanium hanger, I am working on a titanium bottle opener and a small key shaped USB. I don't want to get to crazy though and turn it into something it wasn't meant to be.

BestLeather.org just released this positive review of the Legacy Key Fob. Please check it out when you get a chance and get in on a fob perk if you think you or someone you know might like one. Thanks, Jim
http://bestleather.org/j-ryan-co-leg...ehide-key-fob/
http://bestleather.org/wp-content/up...yFob-Match.jpg

This looks like a great groomsmen gift for my upcoming wedding. PM'd you about timeline/logistics.

Quote:

---

Originally Posted by JRCHolsters

They all come with sets of hardware that allow for different configurations. Any would work for you, just depends on your choice of hide.

---

Would it be possible to get a hanger tab on each end of the holder? That would allow suspension (from the belt) from one end, and attachment of a big fat round electronic car key control at the other end.

Quote:

---

Originally Posted by SAWBONES

Would it be possible to get a hanger tab on each end of the holder? That would allow suspension (from the belt) from one end, and attachment of a big fat round electronic car key control at the other end.

---

Sure, I could throw an extra hanger tab in for that.

Quote:

---

Originally Posted by JRCHolsters

Sure, I could throw an extra hanger tab in for that.

---

I'm in.

Quote:

---

Originally Posted by SAWBONES

I'm in.

---

Thanks! When I update contributors at the end of the campaign, just remind me on the extra hanger.

Just wanted to post a quick update on the Legacy Fob. Got the new clicker dies in today and have been playing with some scrap to get the "feel" for them. Will be starting production soon. Thanks to all the P-F members who helped out on this campaign. If you get a chance, shoot me over your Monogram info if you haven't already.
https://scontent-sea1-1.xx.fbcdn.net...65&oe=5998BC40
https://scontent-sea1-1.xx.fbcdn.net...6e&oe=599573E0