Re-assembly of the mag extension...
Quote:
Originally Posted by
GJM
My Langdon 1301 only takes six 2.75 rounds. To get the seventh in, I really need to force it the last bit, and it then doesn’t want to release from the tube. I pulled the spring and follower, reinstalled them, with no change. Thoughts?
Take the mag extension off, pull out the spring and follower. Re-install with the shotgun pointing down. Put the follower on the end of the spring, pointing up toward the mag tube’s end. Pull up holding the spring while gravity holds the follower all the way on the spring. The spring should be fully inserted into the follower. Feed the spring UP into the mag tube. When you feel the follower bottom out on the end of the mag tube, hold pressure on it while feeding the mag extension onto the other end of the spring. One coil at a time feed the remaining spring into the mag tube. This insures the spring is all the way into the follower. When the extension meets the mag tube threads, thread it on.
That’s all I can think of. You should be able to load a full 7 rounds into the mag tube with a half a round or so to spare.
the best way to attach under mountrail for 1301comp.
hey guys, I live in japan, and bought beretta 1301 comp 24inch for hunting in according to japanese law.
I want attach under mount rail for 1301.
But, these are som problems.In japan, to get gun is very difficult and limited.
First problem, to get aftermarket parts is difficult for Japanese law, because of japanese gun control.
the gun part demand is noting, the gun shop don't have motivation for sale.
Second promblem, I can get some gun parts to use brownells.com. but the japanese custom permit the part only I have been get already.
For example I can get aridus SGA adapter for1301, but I can not get SGA stock for mossberg. likewise, I can not get aridus hundguard kit.
back to the subject, I want to attach under mount rail.
i already tried two method.
one method is to use velcro type tape, but it is not work because of 1301 original hundguard's checkering.
the other method is to use double side tape. the result is same at velcro type.
I can not try screw type, i think it effect gus action bad work.
I have no idea. to attach mount rail.
please tell me your nice idea.
P.S.
thank you for read my poor english.