Beretta 92 LTT spare parts?
I'm switching from M&Ps to a 92 LTT for nightstand & match duty. For my M&Ps, I would always keep a spare striker assembly in my range bag b/c I knew they were prone to breakage. What parts are prone to breakage on the 92? What should I keep in my range bag?
I know trigger return springs are known to break but that's it.
(I searched the forum for this and didn't find anything)
e: after searching for "beretta 92 maintenance schedule" instead of "beretta 92 spare parts" I found this post https://pistol-forum.com/showthread....l=1#post148905
Quote:
Originally Posted by shootist26
Beretta 92:
Most important is to replace recoil spring and trigger return spring every 5000 rounds. This prevents the gun from battering itself with extra stress on the locking block. The latest gen locking block is usually good for 25,000+ rounds, but you may want to replace it at 20,000. I will also clean out the extractor channel every 5000 rounds. The extractor pin is staked into the slide, so it may not be a good idea/necessary to excessively clean the extractor channel. I have never run into an issue with broken firing pin or worn firing pin springs. I believe the gun will still function with a broken firing pin.
Any suggestions for trigger bar spring and slide stop spring? Mine have never been replaced (10,000rds) and I have yet to see any breakages or performance degradation.
Spare parts I keep:
recoil springs, trigger return springs, trigger bar springs, extractor spring + extractor, locking block + plunger,