Excellent load. Long and fully mag-length in 9mm Glocks.
Is the ejection port in the 365 shorter? Eyeballing, looks like the nose of the round is catching a curve on the bottom right of the port.
Printable View
https://www.armorycraft.com/product-...h-with-texture
https://www.vuurwapen.com/vuurwapen-...elease-button/
I have tried both of them and really like the checkered Vuurwapen. In stock here: https://www.omahaoutdoors.com/vuurwa...utton-pyramid/
This is the one that's helped to eliminate my rust issue: Lakeline LLC Stainless Steel Magazine Release Button for 9mm Sig P365
Do you happen to know the build date of your pistol? Are you able to take a picture of the feed ramp on your barrel?
I’m curious which version barrel you have and whether it’s the old narrow feed ramp or new wider feed ramp.
I understand this could be, and likely be, not related to the feedramp at all.
Is there a listing of the changes Sig made to the 365 family since introduction?
The ones I know of
- 2 striker redesigns
V2 changed striker tip to make it angled to reduce primer drag and changed spring to a shorter length
V3 changed the channel liner shape so that backplates wouldn’t inadvertently come off during firing
- 1 extractor redesign
- 1 feedramp redesign
I’m sure SigTalk has these and more if you’re willing to wade through that mess.
V1 Striker
Attachment 82939
V2 Striker
Attachment 82940
V3 Striker
Attachment 82941
Extractor
Attachment 82942
Feedramp (V1 on top, V2 on bottom)
Attachment 82943
In the very, very beginning there was an RSA change for FTRB and a change to the barrel hood due to peening.