How I learned to Stop Worrying and Love the 3rd Gen S&W

I’ve been down this road a few times before. I’ve always had an irrational liking for 3rd Gen S&W semi-autos. They just never seem to like me back. I’ve sold off and traded several models over the years. This time is different, it has to be damn it. I’ve finally found a model that works and makes sense to me.

The 5903 SSV (Short Slide Variant)

Attachment 4498

Only 1500 produced in 1990.
Basically a full frame (alloy) 5903 mated to a shorty 6904 top end. Similar to the Beretta 92/96 Centurion or Colt Commander in concept, full frame short slide. Nothing really special since you can swap frames and top-ends and build your own. Still, I love the more obscure models and S&W made a ton of variants over the years.

Good:
1- I like DA/SA pistols. My go to have been Beretta 92’s and this has the same manual of arms.
2- Frame is alloy like the 92. The 5906’s (steel) frame guns just never worked and were too heavy.
3- Full length frame avoids the dreaded pinky pinch reload and has a nice no snag bevel.
4- 17 round Mec-Gar mags offer good capacity, reliability and only cost around $20 dollars.
5- Support hand fits frame without interference with controls.
6- Trigger is great, both single and double action.
7- Straight style grip mimics the 1911 or Beretta 92 Vertec. Curved backstrap grips also available.
8- Square trigger guard fits my support hand index finger grip. I cheat it forward and it fits the slight curve just right. I actually like the square guards.
9- High grip is easy with the right sized beaver tail and total design.
10- Solid reputation for reliability.

Attachment 4499

Attachment 4500

Attachment 4501

Attachment 4502

Bad:
1- Part support is terrible.
2- Aftermarket sights are few and nobody knows what fits what.
3- Holsters are hard to source.
4- Not crazy about two-tone.
5- Reputation for just “ok” accuracy.
6- Only hipsters and derps shoot 3rd Gens.
7- No rail.
8- It’s not a TSW or PC 3rd Gen.
9- Miami Vice ended in 1989.
10- I’m the only one who cares?

Attachment 4503

Mod 1:
I hate ambi-controls. Thankfully, they made single sided safety assemblies. There are several versions out there spanning the Gen 1 – Gen 3 S&W’s. Some have thinner levers. The silver two-tone look had to go. I found a black single sided lever and installed it. Much improved mod for both carry and function.

Attachment 4505

Attachment 4507

Attachment 4508

Attachment 4509

This is a work in progress and I’ll update as I go along. I welcome any ideas, suggestions or insults.

can JM hook you up with holsters?

That's actually a damn good looking 3rd Gen. I love the looks of the 3rd gen guns, unfortunately I have trust issues with 3rd Gen guns. I had a 4044 as my first issued duty weapon. Was not a fan. I always thought the ASP conversions were cool.

I had one of those for several years, it served mostly as a fanny pack gun. I like the size of it, but mine was marginal as far as accuracy.

The same sights that fit the 5906 fit the 6906, and the 4006, etc., and that gun was well.

The flush fit MecGar 17 round mags work really well in those guns.

Novak still makes 3rd gen sights.

I'm too old to be a hipster. I've recently rediscovered these guns of the '80s and '90s. The design elements really are amazingly well thought out. I'm looking at 3 different models right now, two calibers, three levels of capacity and almost all the internal parts interchange. They point well and none of the controls get accidentally actuated or are hard to use. I could go on and on... but I will add that XS Big Dots are also available.

Interesting combination of frame to slide.

I'm not sure that I'd run a large amount of rounds through the gun though. Parts are harder and harder to come by. We would buy 9m extractors by the gross, as it was a slim part and prone to chipping and breaking. (I had one break in the field as I was shooting a dog that was chewing on me in a back yard once.) The alloy frames in the 6906's and later 6946's would start to crack just north of the 30k mark.

I have to admit, back when we issued 5906's, had I came across one of these 5903SSV's, I'd have snagged one up for off duty carry.

Quote:

---

Originally Posted by breakingtime91

can JM hook you up with holsters?

---

I've contacted him about one. Trying to figure out which mold to send him. 6906 or 5906? Can someone confirm the square frame 5906 and 6906 have the same length dust cover? If so, I'll source a 6906 blue gun mold since it has the short slide/barrel.

Quote:

---

Originally Posted by rathos

Novak still makes 3rd gen sights.

---

Sights are a nightmare on these guns. They made several front and rear variations over the years. This one has the later Novak rear style which is the best IMO. The dovetails are not the same and it's hard to find info on the specs.

I have a 10-8 performance rear on the way (.140 black U notch) that is said to fit. I plan on pairing it with a high vis front Trijicon HD or Ameriglo. I'm prepared to do some fitting.

Today is the first day this week I have carried my 3913TSW rather than my Glock 19. I took it to the range Monday and it was like rekindling an old flame. Comfort, accuracy, trigger DA & SA, first shot on target it was magic. I only have one spare 7 rd mag. I need 15 rounds and 15 in a spare mag. I know I do the internet tells me so. Today I am carrying my 19. Then I read this ARGH!