I’d donate.
Printable View
Attachment 30599
Wilson Combat Compact Carry 9mm. Shot 400 rounds through it today. 100 147 grain hst and 300 assortment of 124 and 115. Reliable so far and easily the best shooting pistol I have shot. Im sold and while I will always own Glock I have a feeling Wilson combat has won a spot in my holster.
https://youtu.be/I5oMAv7KbNE
Shot timer died but accurate description of how I shot
Well, I'm back in business - 400 rounds today with no malfunctions...
When I field stripped my 1911, I discovered that it was really dry and dirty. There was little left of the Wilson Lite oil, and there was a great deal of carbon build up, especially on the feed ramp. The extractor channel did not look particularly fouled, but there was definitely gunk in the area. I gave the pistol a comprehensive cleaning, and decided to relube with Slip 2000 EWL.
I also replaced the recoil spring with a 13# Wilson flat-wire. Now, I am one of the guys who didn't have a great experience with a flat-wire kit in my .45 1911, so I'm a bit of a skeptic to begin with. However, after my problematic session I decided to review ToddG's experience with his Springfield/Warren 9mm - for a period he ran a 14# Wolff variable spring (at the suggestion of Jason Burton), but eventually settled on a Wilson flat wire. I noted a comment that the benefit of a flat wire spring in a 9mm 1911 is an increase in closing pressure, and considering my FTRB issues, thought my pistol might profit from this feature.
I had no issues today through 345 rounds of AE 115 grain FMJ and another 55 rounds of Federal Syntech 150 grain. The pistol still looks wet in places, so I think the switch to EWL helped. I thought the flat-wire spring imparted a very controllable recoil cycle - and at no time did the slide feel sluggish. All good things. I'm currently debating the appropriate maintenance interval.
Slip EWL is an awesome lube. I got a quart in 2012 and and it's all I've used ln handguns and rifles since.
Any pistol with long rails like 1911s and Berettas need lots of lube. Lube it every time you shoot, and after you shoot if it's going in your holster!
I don't like taking the extractor out of 9mms any more than absolutely necessary because of the amount of flex it takes to clear the hook and then hooks drags in the channel all the way out. Hose it out real good with brake cleaner or something and leave it in there. I have never seen or heard of fouling in the extractor channel causing an issue in a 1911.
And I've never seen or heard of an over-tensioned extractor manifesting itself at 2000 rounds. Seems we all have different experiences to share.
I think mine came with a .180 front and I had it swapped with a .170 because it was shooting a tad low for my sight preferences. It was probably 2017 manufacture date.
Maybe splitting hairs for a hundredth difference but it's dead nuts on for me now elevation wise for both 147 hst standard pressure and my 147 handload.https://uploads.tapatalk-cdn.com/201...797b2adaff.jpg
Sent from my Moto G (5) Plus using Tapatalk
Well this thread sucks.
I bought a 9mm Kimber Stainless target which was sitting in the used case looking sad for a silly cheap deal.
I expect some armorer level maintenance may be needed (it is after all...a Kimber) but damn is it a soft shooting gun.
Sent from my XT1585 using Tapatalk