S&W Shield Sight Pusher?

In my armorer's "collection" of tools, I currently have MGW sight pushers for Glock, Sig and S&W M&P. Does anybody know of a pusher yet for the Shield??

I emailed someone on a forum that manetioned putting nightsights on the Shield. He said that he used this product:
http://www.sightpusher.com/. I have no idea. I will email you more info.

Here is a link to the thread in question: http://smith-wessonforum.com/smith-w...ts-shield.html

Used the old fashion brass punch on mine.

Quote:

---

Originally Posted by Prdator

Used the old fashion brass punch on mine.

---

I tried this and the rear sight wouldn't budge. My LGS tried as well with no success. I think mine is actually one piece. ;)

That's not good. Mine shoots about 4 inches left at 15y. Nice groups, just left.

I've abandoned the hammer and punch method whenever possible in favor of a dedicated sight pusher. It gives better results from a cosmetic and tritium preservation standpoint. It's also easier to get a more precise adjustment on sights with a pusher over the caveman method.

To be honest mine was shooting left about 3-4 inches too. I weakened up on the grip strength and it dramatically improved. Since it's a smaller/thinner grip I came to the conclusion that my strong hand was pushing left due to over force. I still want better sights but haven't decided what I want. The trijicon HD set is on the top of the list.

Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

Quote:

---

Originally Posted by Wayne Dobbs

It's also easier to get a more precise adjustment on sights with a pusher over the caveman method.

---

Hmm, This is THE reason I dont like my sight pusher as i cant get the sights center on the slide ( Glock) and I use a dial calipers to do this and typical want them center to within .002 and have MUCH better luck with a punch/hammer doing this. In fact the last three I put on yesterday I finally gave up on the pusher and went to the punch hammer was done in two taps. This is were YMMV really comes into play. LOL

Quote:

---

Originally Posted by Prdator

Hmm, This is THE reason I dont like my sight pusher as i cant get the sights center on the slide ( Glock) and I use a dial calipers to do this and typical want them center to within .002 and have MUCH better luck with a punch/hammer doing this. In fact the last three I put on yesterday I finally gave up on the pusher and went to the punch hammer was done in two taps. This is were YMMV really comes into play. LOL

---

My recent sight swapping efforts have yielded three G17 sight installs with ZERO secondary tweaking. All have been confirmed out to 50 yards. I'll keep my $1.30 brass rod.