-
1 Attachment(s)
- Reloading press used (list modifications if relevant): 1967 model RCBS Jr2
- Caliber: .308
- Bullet (Weight, Coating, Profile, Manufacturer): Hornady 195gr ELDM
- Powder manufacturer, type and charge; volume, type (ball, stick, flake): Varget 43.0gr
- Dies used: Redding
- Primers used: CCI Large Rifle
- Cartridge Overall Length (COAL): 2.88
- Chronograph data (if possible): Next time
- Goals intended with this load: See if it groups and shows pressure signs (did not)
- Results - accuracy, smokiness, clean burning, flash, temperature, smell, brass deformation, etc.: Nothing to speak of other than decent accuracy
- Problems encountered and fixes applied:
- Anything of interest: Fired from stock Remington 700 except for Timney 2 stage trigger, Dead Sandman Ti suppressor, and KRG Bravo stock. I plan to go up .5 of a grain and see what happens along with getting chrono data.
-
1 Attachment(s)
- Reloading press used (list modifications if relevant): RCBS Jr2
- Caliber: .308
- Bullet (Weight, Coating, Profile, Manufacturer): Berger 185gr Juggernaut
- Powder manufacturer, type and charge; volume, type (ball, stick, flake): Varget 43.3gr
- Dies used: Redding micrometer
- Primers used: CCI Large Rifle
- Cartridge Overall Length (COAL): 2.88"
- Chronograph data (if possible):
- Goals intended with this load: #LetsJustSeeWhatHappens
- Results - accuracy, smokiness, clean burning, flash, temperature, smell, brass deformation, etc.: It shoots, it shoots nice
- Problems encountered and fixes applied:
- Anything of interest: 3 shots on each dot at 100 yards. This is JV_'s load, I simply grabbed what works for him, I did no load development.
-
With this load and your rifle, you could consistently drill holes through grapefruit at 600 yards.