Negative.
Printable View
Excellent. Thanks
I don't have the 1301 but I have the A400 Xtreme as my duck/dove/clays gun. The 1301's operating system is based off the "Blink" gas system found in the A400 Xtreme. There is no rubber or polymer wiping anything on the piston. The piston is grooved with teeth and this helps to scrape the carbon as the piston cycles back and forth (the teeth look like the teeth used to ratchet suppressors onto flash hiders/muzzle brakes). I apply FIREclean to the piston/piston bore and once in a blue moon I'll wipe out the carbon and spray with gun cleaner and scrub it out with a plastic brush. You can use a wire brush, but the carbon buildup has not been that bad in my experience. I haven't cleaned my gun's piston system since before last duck season. I've been running it to see how long it will go. So far so good, with 1200 rounds expended since beginning of duck season. Everything from 7/8oz. 2 3/4 to 1 9/16oz. 3 1/2" shells. If I still haven't had any problems by beginning of duck season this year, I'll still probably clean it "just because." I'll get some pics up tomorrow morning.
The barrel on my A400 is backbored/oversized. Barrel is chrome lined. A couple passed with a boresnake coated in some oil cleans it up to a mirror shine.
Again, I don't have experience with the 1301, but since my A400 Xtreme is the "parent" gun of the 1301, everything I said should carry over. If my facts are wrong, I apologize.
No idea.
I happened to have my TX4 with me, on the way to a match, to show a buddy. Rail is metal, and rear sight, marked LPA, is metal. Same for the rail (metal) on my 1301. I don't own a 1301 Tactical, but the one I shot at the Beretta class last weekend looked the same as my TX4.
http://i250.photobucket.com/albums/g...ps42bee672.jpg
So, money aside, why should I buy a 1301 instead of a Benelli M4 with a full-size mag and C-stock?
Can you change enough things on the M4 to get below ten 922R parts and install a collapsing (I believe the factory version is pinned open) stock with a full length mag?