Best way to make Glock more grippy?

[Cool Breeze]

Trying to figure out the best way to get a more grippy surface on a Glock 19 Gen 5. Its not terrible the way it is but its not great either. My experience is as follows:

1) I've played around with some talon-like grip tape that feels plasticky and has a pebble-like texture (there are so many brands of these) and it was just ok. It was not as grippy as a I wanted and did start peeling.
2) Decal/Skateboard tape is way to aggressive for me for EDC.
3) Hogue sleeve - this is on a Glock 43 and it has made the gun for me considerably more shootable and less snappy. I never see these recommended by serious shooters though and not sure why? I vaguely remember back in the day that people said they slipped off and twisted too easily. On a non-range gun like my 43, I have not had a problem.

Contemplating the following:
1) Sleeve of some sort - Hogue? Limbsaver? Also the Warren Hand Grip looks like the extreme of this with the molded support hand swell.
2) Hockey Tape / Camo form?
3) Send out for stipple job - finding the goldilock texture without actually feeling in person might be a tough sell.
4) better grip tape I'm not aware of?

What do you all like?

ETA - I don't remember every gun I've finger fondled but the Glock RTF2 frame was way to aggressive and the HK p30 was near perfection. I haven't played around with anything new offered in last few years.

[blues]

https://www.amazon.com/gp/product/B0006HVKLK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1


as recommended by GAP


108203

[Leroy Suggs]

https://www.amazon.com/gp/product/B0006HVKLK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1


as recommended by GAP


108203


This is your solution.

[CleverNickname]

I got a roll of hockey tape for like $10 and I just replace it when it's not as grippy as I want. I tried laser-cut sandpapery grips and they worked OK I guess but they weren't as secure (tended to have the edges peel up) and cost a whole lot more.

[Cool Breeze]

https://www.amazon.com/gp/product/B0006HVKLK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&th=1


as recommended by GAP


108203


This is your solution.

That was quick! This stuff is grippier than that talon-grip tape? and hopefully sticks better?

[Cool Breeze]

I got a roll of hockey tape for like $10 and I just replace it when it's not as grippy as I want. I tried laser-cut sandpapery grips and they worked OK I guess but they weren't as secure (tended to have the edges peel up) and cost a whole lot more.

Glad to hear this worked in practice and is an option. Thank you.

[Leroy Suggs]

Cool Breeze Grippe Sticks. Try it..

[blues]

That was quick! This stuff is grippier than that talon-grip tape? and hopefully sticks better?

I have a set of Talon Grips that TC215 sent me for one of my 26's and it works fine for me. The 3M tape has a "sandier" slightly more aggressive feel to it, and it's inexpensive enough to change out as needed.

[GJM]

You need to decide do you want a texture that is optimized for shooting (sharper/coarser) or better for carry against your skin. In wet and colder conditions, more traction is desirable.

Overall, I think the G4/5 texture is pretty good as a compromise. I also have LTT stippling and Boresight.

108206

108207

[JCN]

Cool Breeze

These are my findings, YMMV.

The most important areas for grip for me are front and rear backstrap.

More aggressive texturing there doesn’t affect clothes or belly as much for a carry gun.

So skate tape front and rear might be a decent compromise.

Personally I think it’s worth the investment to play with the Stippletec kits.

https://store.otdefense.com/collections/stippling-products

That way you get to do things exactly the way you want with regard to texturing and location.

It also allows you to do projects like this G26 with full grip length extension.

108210

[Lon]

Caleb Giddings uses goon tape.

https://goontape.com

[Jim Watson]

I have one word for you: rubber.

I like the Talon rubber tape on plastic guns.
I went a while with a 3M rubber stair tread tape on the front strap of my 1911s.

[Cool Breeze]

Cool Breeze Grippe Sticks. Try it..

Is this the stuff you are talking about?

https://www.krakenbatgrip.com/collections/grip-sticks

[Cool Breeze]

I have a set of Talon Grips that TC215 sent me for one of my 26's and it works fine for me. The 3M tape has a "sandier" slightly more aggressive feel to it, and it's inexpensive enough to change out as needed.

I appreciate the comparison - I would probably would at least want the 3M variety then for sure.

[Leroy Suggs]

Is this the stuff you are talking about?

https://www.krakenbatgrip.com/collections/grip-sticks

No. The 3M tape from Amazon Blues posted a pic of.

[Cool Breeze]

You need to decide do you want a texture that is optimized for shooting (sharper/coarser) or better for carry against your skin. In wet and colder conditions, more traction is desirable.

Overall, I think the G4/5 texture is pretty good as a compromise. I also have LTT stippling and Boresight.

108206

108207

I want something more optimized for shooting. I almost always wear an undershirt. When I spoke about the few grip experiences I didn't like (RTF2 and Skateboard tape) it has to do with how it feels in my hand and not necessarily against my skin in AIWB. That being said, I don't want it so sharp that its abrading clothing either.

Of the stippling you have had done...do you think one fits more in that goldilocks zone?

[GJM]

I want something more optimized for shooting. I almost always wear an undershirt. When I spoke about the few grip experiences I didn't like (RTF2 and Skateboard tape) it has to do with how it feels in my hand and not necessarily against my skin in AIWB. That being said, I don't want it so sharp that its abrading clothing either.

Of the stippling you have had done...do you think one fits more in that goldilocks zone?

Most expensive, but the Boresight level one duty package with the sharp texturing is my favorite. Keeps the stock grip angle but has a trigger undercut and other nice subtle improvements.

[Up1911Fan]

I've had Boresight do 6 or 7 guns for me and prefer his work to all other options. If you just want texturing and no other work done the Competition Series package is pretty reasonable at $165.

[Cool Breeze]

No. The 3M tape from Amazon Blues posted a pic of.

Got it. Thanks!

[Clusterfrack]

Tried stippling, and found that I strongly prefer rubberized decals lke Talon (https://a.co/d/2JzOOww) or Tractiongrips (https://www.amazon.com/Tractiongrips-overlay-decal-Glock-Generation/dp/B010TREC20/).

Athletic tape or strips of skateboard tape work but they can migrate or come loose, causing malfunctions or worse.

[Sig_Fiend]

This self-vulcanizing silicone tape (https://countycomm.com/products/self-vulcanizing-grip-silicone-x-treme-tape-usa-made) works amazingly well. Like no other grip sleeve or handgun-specific wrap I've tried comes even close.
It holds more rigid than any grip sleeve I've tried and haven't seen any movement. The main issue I see is the potential downside for a carry gun with possibly being too grippy such that it impedes draw, grabs clothing, etc.

[CleverNickname]

Athletic tape or strips of skateboard tape work but they can migrate or come loose, causing malfunctions or worse.
When I use hockey tape, I found it's best to wrap it in one big strip completely around the grip.

[RevolverRob]

I like patches/spots of skateboard/grip tape, not large pieces. This does a few things for me:

1) I find it easier to get the tape to stick to specific areas, because I cut it and shape it specifically to that area.

2) If I want to increase/decrease traction: Add more tape to fill in more area or remove pieces to decrease it.

3) I can figure out my high wear spots, because the tape wears faster than anything else. If it wears sufficiently fast, I can opt to stipple those areas.

4) Skateboard tape is cheap and not permanent, allowing me to easily try different things vs. the permanency of stippling.

___

With skateboard tape and movement/unsticking. With proper skateboard tape (not stair tape, which seems to come loose faster), I've never had issues, but the trick absolutely is - scrubbing the grip clean and degreasing the area, before you apply the tape. With plastic guns, I disassemble them and wash them in the sink with Dawn dish soap, then degrease with rubbing alcohol, and apply my tape. With the tape press firmly from the center out with the end of a cleaning rod to push out any air bubbles.

I do not like Goon or hockey tape on my guns. I have little girl hands and the goon/hockey/anything that requires multiple wraps bulks up my grip too much.

Actually, that's my top tip for improving grip traction - grip size reduction. When the gun feels more like a toy in my hand, I don't need much in the way of additional traction, because I can simply crush the thing into my hand.

[Jay585]

A bit unconventional, and I haven't tried it (I bought a can but never actually put it on) but Marcus Wynne (RIP) recommended truck bed liner.


b. With his experience and skill set he can get that Karl Sokol http://www.chestnutmountainsports.com customized G-19 (grip reduction, beavertail, trigger job, innards polished, Trijicon HD sights, and the black stuff on the handle – truck bed liner. Don’t laugh, youngsters…works great when wet, much cheaper than other fancy finishes and you can touch it up yourself if needed with a $5 can from the local auto store) out of the holster and on to work with a clean Mozambique (at 10 yards instead of 7) from deep concealment in an average 2.0 seconds, though he has been known to go faster when frightened.
https://marcuswynne.wordpress.com/2016/01/31/a-not-random-at-all-public-apology-to-black-center-tactical/

Wish I remembered this when I had my G43x. Might've made shooting it easier.

[Clusterfrack]

This self-vulcanizing silicone tape (https://countycomm.com/products/self-vulcanizing-grip-silicone-x-treme-tape-usa-made) works amazingly well. Like no other grip sleeve or handgun-specific wrap I've tried comes even close.
It holds more rigid than any grip sleeve I've tried and haven't seen any movement. The main issue I see is the potential downside for a carry gun with possibly being too grippy such that it impedes draw, grabs clothing, etc.

Looks broadly useful. Ordered:
https://www.amazon.com/X-Treme-Tape-TPE-XR1510ZLB-Silicone-Rectangular/dp/B00HWROO7E/

[Archer1440]

Looks broadly useful. Ordered:
https://www.amazon.com/X-Treme-Tape-TPE-XR1510ZLB-Silicone-Rectangular/dp/B00HWROO7E/

Not great when wet. Have used the exact same stuff on motorcycle grips and it’s fine… until it rains.

Very good in dryer conditions and excellent for emergency leak repairs and similar applications, and of course YMMV on a pistol if your hands are dry. It’s especially important to keep oils off it if you want it to work well, they don’t break it down but they do make it slicker than ice. On a bike, you always get road oil mist when it rains, exacerbating the problem. On a pistol, in my experience blood makes it act like a bar of soap - you really need mechanical traction where blood is involved.

[LukeNCMX]

I like stippling for EDC more than tape. For me tape typically does not stay put with factory adhesive with a crushing support hand grip and frequent training. There are exceptions to this for open carry (skateboard tape). Talon's pro tape was promising but it doesn't last long enough for my taste. I have not tried hockey tape put it looks interesting.

For EDC stippling I like starting off with aggressive stippling and dialing down the texture in specific spots on the frame as needed with 400 grit sandpaper. I find this strategy offers the best compromise. Places I have had good experience with for stippling are Boresight Solutions and Great Lakes Custom Works/ATEi (their chaos pattern is very good).

[vcdgrips]

Based on shooting Glocks since 1991 and stippling/texturing grip panels since 06 ish, I would offer the following:

1. Rubber slip ons move over time. This can be minimized with the application of spray glue. This movement can happen within days or weeks.

2. Abrasive tapes like 3m anti slip stair tape smooth/wear out over time. Re application is part of the deal. Re application can be required after a few months to several months.

3. Stippling can wear down and require a touch up. This often happens over the course of a few years. I am a DIY stippler for my guns and I have done a number of them for friends and colleagues as well. As I do not have an FFL, I do no interstate work so know I am not trolling for business.

4. As the result of traveling the road of 1-3, I went to a tree bark stipple texture as it wears better and is more grippy than the multi pore orange peel style.

5. Ben at Boresight far exceeds the intersection of quality/function/value/appearances re his stippling work. As an aside, he has been most gracious to me re safety and technique issues, particularly when I was just starting out in 20008ish.

6. Anything short of stippling is simply a consumable and needs to be treated/maintained as such. Accept that reality and drive on.

108219

[rathos]

Talon rubberized is the best I have used if you don't want to stipple. Preparation is key, cleaning the areas with rubbing alcohol prior to putting on the grips. Also, one thing I missed the first couple times I used it is they recommend heating the grips once on with a hair dryer to make the adhesive melt to the frame. I did this on a G26 and even with a lot of aggressive shooting and handling I haven't had any issues with peeling.

[Noah]

The Talon Rubber is still slick as soap to me, but my primary problem is sweaty hands. The Pro texture is a great balance of comfort and grip for many people, but it's ugly and wears away quickly. I love the grip from the granulate grips but you have to work around them for carry comfort.

I still prefer a good stipple but I have a close friend who does professional stipple work on the side. However, more and more local shops in my area are offering laser stippling and other services. If it wasn't for me friend, I'd go that route.

I hike up my undies in the summer as a skinguard and wear undershirts in all the cooler months, as the hassle is worth it to me with how much my hands sweat.

If it wasn't for how much I like the Gen 5 full size guns and the 48, I'd get an RTF2 19. I like leaving things stock when I can bear to. If the Gen 4/5 texture went 360 around the backstrap and higher on the sides, I'd probably actually be really happy with it as a carry compromise.

My 42 is left OEM slick for deep carry practicality and the fact that it has so little recoil and so little exposed grip area.

[Jim Watson]

As thin as Talon rubber is, it makes my Plastic M&P feel bulky. If there were something that would not lift at edges, I would just tape the front strap.

It is fine on the little G43.

[Clusterfrack]

As thin as Talon rubber is, it makes my Plastic M&P feel bulky. If there were something that would not lift at edges, I would just tape the front strap.

It is fine on the little G43.

Try TractionGrips. They are thinner material, and I use the procedure below to apply and have had no peeling even after years of use.


Clean grip with rubbing alcohol and dry thoroughly
Warm grip and decal with hair drier
Start applying decal by aligning with the mag release hole (the most important spot)
Slowly apply the rest of the decal, smoothing out any bubbles
Warm again with hair drier and adjust as needed, then apply pressure evenly
Let cool

[JCN]

Try TractionGrips. They are thinner material, and I use the procedure below to apply and have had no peeling even after years of use.


Clean grip with rubbing alcohol and dry thoroughly
Warm grip and decal with hair drier
Start applying decal by aligning with the mag release hole (the most important spot)
Slowly apply the rest of the decal, smoothing out any bubbles
Warm again with hair drier and adjust as needed, then apply pressure evenly
Let cool


You can also upgrade the adhesive on the decals too.

Also sometimes rounding corners can eliminate peel points too.

I’ll often take a toothpick or plastic point to really work the corners down to the plastic.

[Hot Sauce]

108206


That undercut looks awesome and subtle, like it could have come from the factory that way. Your own doing?

[GJM]

That undercut looks awesome and subtle, like it could have come from the factory that way. Your own doing?

That is a Langdon stipple job with undercut.

[Noah]

That undercut looks awesome and subtle, like it could have come from the factory that way. Your own doing?

Thats an LTT gun, comes with the laser stipple and undercut.
https://langdontactical.com/custom-gun-work-laser-stippling-for-glock-pistols/

[tlong17]

Talon grips are the “good” option for me. An LTT stipple and undercut is the “better” option. A Boresight duty series with Razorback is the “best” for me.

Priced accordingly of course.

[Hot Sauce]

Oh, thought they just do the laser part. Nice work.

[Ray Keith]

I’ve had good luck with Talon grip tape from Brownells. As someone mentioned here, make sure to degrease and then heat the surface before applying.





Sent from my iPad using Tapatalkhttps://uploads.tapatalk-cdn.com/20230810/b41afea200a8bd75069e01c71e1831f2.jpg

[DC_P]

Cut a piece of mountain bike tire tube to fit. Ugly but effective.

[CCT125US]

Many good options.

I've been using MOB Grip, found at your local skate shop. IIRC a board length was around $10. If found to be to aggressive, it can be scuffed down.

108258

[Cool Breeze]

Caleb Giddings uses goon tape.

https://goontape.com


Figures they are sold out but its interesting to see an "upgraded" version of hockey tape out there. Didn't know this stuff even existed. Thanks!

[Cool Breeze]

This self-vulcanizing silicone tape (https://countycomm.com/products/self-vulcanizing-grip-silicone-x-treme-tape-usa-made) works amazingly well. Like no other grip sleeve or handgun-specific wrap I've tried comes even close.
It holds more rigid than any grip sleeve I've tried and haven't seen any movement. The main issue I see is the potential downside for a carry gun with possibly being too grippy such that it impedes draw, grabs clothing, etc.


Not great when wet. Have used the exact same stuff on motorcycle grips and it’s fine… until it rains.

Very good in dryer conditions and excellent for emergency leak repairs and similar applications, and of course YMMV on a pistol if your hands are dry. It’s especially important to keep oils off it if you want it to work well, they don’t break it down but they do make it slicker than ice. On a bike, you always get road oil mist when it rains, exacerbating the problem. On a pistol, in my experience blood makes it act like a bar of soap - you really need mechanical traction where blood is involved.

This stuff looks great...I'd probably a bit concerned with the slippery when wet comments as my hands sweat a bit and its partially why I'm looking for more grip. Relatively cheap to try though.

[Cool Breeze]

A bit unconventional, and I haven't tried it (I bought a can but never actually put it on) but Marcus Wynne (RIP) recommended truck bed liner.


https://marcuswynne.wordpress.com/2016/01/31/a-not-random-at-all-public-apology-to-black-center-tactical/

Wish I remembered this when I had my G43x. Might've made shooting it easier.

I know PF members would come up with a tone of different options that I didn't think of but this is the biggest surprise. It's interesting to say the least.

[Cool Breeze]

Based on shooting Glocks since 1991 and stippling/texturing grip panels since 06 ish, I would offer the following:

1. Rubber slip ons move over time. This can be minimized with the application of spray glue. This movement can happen within days or weeks.

2. Abrasive tapes like 3m anti slip stair tape smooth/wear out over time. Re application is part of the deal. Re application can be required after a few months to several months.

3. Stippling can wear down and require a touch up. This often happens over the course of a few years. I am a DIY stippler for my guns and I have done a number of them for friends and colleagues as well. As I do not have an FFL, I do no interstate work so know I am not trolling for business.

4. As the result of traveling the road of 1-3, I went to a tree bark stipple texture as it wears better and is more grippy than the multi pore orange peel style.

5. Ben at Boresight far exceeds the intersection of quality/function/value/appearances re his stippling work. As an aside, he has been most gracious to me re safety and technique issues, particularly when I was just starting out in 20008ish.

6. Anything short of stippling is simply a consumable and needs to be treated/maintained as such. Accept that reality and drive on.

108219

The tree bark pattern looks like a really interesting goldilocks pattern. Not the needly like texture of the classic stipple dots you see (or RTF2 texture) but more texture than a gen 5. Thanks.

[Cool Breeze]

That is a Langdon stipple job with undercut.

I didn't realize Langdon's stipple was laser cut. It looks really clean. Lots of patterns too.

[vcdgrips]

CB

That OD Green frame was the first gun I ever stippled. It was "orange peeled" with a OP touch up. It was then the first gun I ever tree barked.

As time has gone on, I am better at prepping the frame (smoothing things out) such that any pattern looks/wears a bit better. I do all stippling by hand, one pore or bark "drag" at a time. I do most of my frame prepping with a dremel.

I am sure that Ben and others can generate similar or better purchase and make it more attractive as well.

Frankly, if you EDC anything on your waistline (and elsewhere), it will wear on clothing over time. The wear and comfort of such things can be mitigated by undershirts, fabric choices/fabric weights and even lining.

[BK14]

Figures they are sold out but its interesting to see an "upgraded" version of hockey tape out there. Didn't know this stuff even existed. Thanks!

Not 100%, but the internet rumor is that goon-tape is just rebranded howie’s hockey tape.

[Archer1440]

Not 100%, but the internet rumor is that goon-tape is just rebranded howie’s hockey tape.

That is essentially correct.

[EVP]

Not 100%, but the internet rumor is that goon-tape is just rebranded howie’s hockey tape.

I laugh and shake my head about how silly and gimmicky some of these items or products can be. So f’n dumb.


Also I think it funny how people use the tape and it’s not even providing traction on the area of the frame that needs it. It’s like they just put it on for looks.

[DMF13]

If the Gen 4/5 texture went 360 around the backstrap and higher on the sides, I'd probably actually be really happy with it as a carry compromise.
It irritates me to no end, that the Glock grips have the smooth areas between the texturing on the sides and the backstrap.

[Noah]

It irritates me to no end, that the Glock grips have the smooth areas between the texturing on the sides and the backstrap.

It's the most crucial part of the gun for what I'd consider the most current grip technique, neutral allowing the gun to return vs the whole wrist cammed as high as possible grip of the 2010s.

[DMF13]

It's the most crucial part of the gun for what I'd consider the most current grip technique, neutral allowing the gun to return vs the whole wrist cammed as high as possible grip of the 2010s.
Yeah, I didn't think about it much, until Mike Seeklander, at a class, recommended I change my grip.

To mitigate the problem I stippled the smooth spot on the beavertail backstrap on my guns. Its not a permanent mod to the guns, which is only a problem for the work gun, but I like to keep the training guns the same as the carry gun.

[ViniVidivici]

I don't like skateboard tape. Too aggressive against my skin while carried, and my sweat would kill it in short order.

DID use it on 1911 front straps years ago, but that's different (and did need to be replaced periodically). I'm in Glock world now.

I stiple my own. The 17 year old G23 frame, which now lives on as a G19 build I carry every day, got the treatment.

Slightly reduced hump with a candle, then sanded front and back straps down (this also largely reduced the finger grooves, win/win), and stipled with soldering iron. Gave it some slight sanding in areas where it was a bit much, and done.

Grip is VASTLY improved. Love the way it locks into my hand now.

I'm with JCN in that front and back straps are most important.

Have done this with the front strap of a 33 year old gen2 G17 also, huge improvement. May do the back of it at some point.

[DDTSGM]

This is so simple I'm sure most of your already thought of it -

I bought a set of Talons for my G17, installed them and then scanned the backing papers and saved as a file.

I then used some clear sticky shelf paper that I had laying around and sandwiched the backing papers between them and cut it out with an exacto knife. Makes a pretty permanent pattern and I still have the PDF copy saved on my computer.

After going to all that work, how often have I used the pattern? Once and even then just for side panels.

[CCT125US]

Dan Lehr I tried some Talon grips and promptly destroyed them. Kept the pattern, just as you did. Talon replaced the originals with the rubber textured ones and I managed to wear those out as well. I go back and forth on use of the Mob Grip. Cheap, easy, and reusable to a point.

[Dorsai]

I mostly have Gen3 Glocks, but I also have a G45 (Gen5) and a couple of G48's. My preference for the Gen3 is Boresight Solutions. I've tried several options, my favorite combo is the 1.5 reduction, razorback, and medium texture. I'll admit that my dislike for the coarse texture is both appearance and the feel. Appearance is secondary. The medium texture feels better to me as well as being more aesthetically pleasing. My dilemma comes with the Gen5 and G48. Glock has improved. I would prefer a Boresight texture on the G45, but I can't justify it for feel. It would be for pleasure. So I haven't done anything. My G48's are similar, but I've put Talon rubber "grips" on them. They are cheap, durable, and they feel good. Just typing this reply makes me think I may want to try them on my G45. But it makes me feel like I'm cheating. Same for slide work. I love Maple Leaf firearms. On Gen3, their work has been great for texture, looks and optics. But when it comes to the Gen5 guns that already come with forward serrations, I can't say I NEED the Maple Leaf treatment for any reason other than I like the look of it. I have to keep reminding myself that better is the enemy of good enough.

[DrkBlue]

https://www.brookstactical.com/

The Brooks A Grip is soft for AIWB and excellent when wet. Really improved handling on both Kahrs and Glocks.

Will need to be periodically refreshed, but mine last two years +/-

[TGS]

I've been very happy with the Talon Grips Pro texture on my Glock 42 and Gen 4/5 Glocks, all used for concealed carry. The only thing I've used previously is repurposed skateboard stuff. I very much prefer the Pro texture, as well as how the gun-specific cut wraps cleanly around the whole grip.

The Glock 42 has very shallow slide serrations, so mine is also wearing the slide serration Talon Grip. Huge help in manipulating the gun.

[JonInWA]

While the original (and still offered) Hogue HandAll rubber grip sleeves would loosen over time, the newer Hogue HandAll Beavertail rubber grip sleeves are a massive improvement. Much more tightly molded, and molded for specific guns, I've found them ergonomically and operationally to be very effective on my Gen 3 G17, G19 and G21.

https://i.imgur.com/TT7ZYzIh.jpg

https://i.imgur.com/ZzfjrEkh.jpg

Previously, I'd used the mountain bike innertube segment and the Warren Grip Assist (but cut down the protruding fin of the Grip Assist by 50%); they were both credible grip improvements, but I've found the Hogue Handall Beavertail to be by far the best, at least for me.

Warren Grip Assist (cut down):

https://i.imgur.com/dfeBz04h.jpg
https://i.imgur.com/DIIxg9dh.jpg

Mountain bike inner tube segment, cut to size:

https://i.imgur.com/8gg2Wvfh.jpg

On my Gen4 G22, I've left well enough alone (at least so far...), stickling with the Glock Medium beavertail backstrap, and when my Gen5 G23 arrives, I plan on also starting with the Medium Glock backstrap and a LTT Grip Anchor.

Best, Jon

[CleverNickname]

108647
JonInWA You have a Glock switch? (I assume that's what that is.)

[Noah]

108647
JonInWA You have a Glock switch? (I assume that's what that is.)

Pretty sure it's a manual safety.

[JonInWA]

It's a manual safety, designed by Leon Hubert of RDIH, which has been merged into and currently marketed by BH Spring Solutions. Here's my review of it:

https://pistol-forum.com/showthread.php?47886-Glock-17-With-RDIH-BH-Spring-Solutions-Tactical-Safety-System-and-Vega-Level-2-3-Duty

And here's more information on it from BH Spring Solutions:

https://bhspringsolutions.com/index.php/product/unintended-firearms-discharge-stopped-tactical-safety-system-for-glock-by-rdih/

Best, Jon

[Bambooshoots]

Bike tire inner tube.

For a double stack get the thinner tube. For single stacks I use the thicker inner tube.

I’ve had a bike tire inner tube on my PPS for years now and it’s still going strong and grippy as ever.

[JMag]

Talon Grips.

[rawkguitarist]

It irritates me to no end, that the Glock grips have the smooth areas between the texturing on the sides and the backstrap.

Amen. If the texture was uniform, the Gen5's might not need a grip job. Drove me up the wall until I finally DIY stippled it.

I tried all kinds of grip enhancements putting off a stipple job. But in my experience a texture job is the only solution - if its not your duty pistol of course.

In doors when I'm not sweating, I like my own texture best. Its darn grippy. Even with no undershirt it doesn't bother me. Although I almost always wear underarmour compression shirts. Now, my Boresight grip job for some crazy reason works the best when my hands are sweating. But yeah, expensive grip job. I put it off until I decided to put together my ultimate carry pistol. So glad I did it because all in all its the best Glock grip I've ever felt/owned.

109679


My 48 DIY grip job. Sorry about the cat hair.

109680

[il duce]

Hockey tape here too. Tried the talons and the bike inner tube and to me the hockey tape was the best.

[FNFAN]

Up until I found this I’d never met a Glock stipple job I really liked for a gun that would be concealed.

109933

Honeycomb pattern from Black Rose Firearms of Ohio.

[FNFAN]

Up until I saw this on a friends gun I’d never met a Glock stipple job I really liked for a gun that would be concealed.

109933

Honeycomb pattern from Black Rose Firearms of Ohio. The “Tree Bark” finish from Business End Customs is great also but he’s primarily a 1911 gunsmith and may not be taking stipple jobs.

[rdtompki]

I used Dark Side Precision for my Staccato 2011 (they do Glocks and a number of other handguns). I couldn't be happier with the Aggressive texture which they characterize as suitable for duty/competition. First time at the range the grip noted my sloppy support hand grip by starting to wear through my left palm (old, dry hands and such). Despite not having touched the gun in 4+ weeks I shot some of the best strings in several years (Steel Challenge). I've had excellent results in the past with Talon grips, but the slight reduction of the 2011 grip works best for me.

[Dog Face Gremlin]

On my 30sf.....cut to fit a piece of bike tire tube and slipped it over the grip.....loved it... but the piece of tire tube would break at the seam...maybe need a heavier tube. Now I have 3M anti-slip tape on the outside section of the gun grip only...works well...but liked the rubber tube much better.