NH Shooter
07-08-2023, 08:14 AM
Introducing the EDCLB HBC horizontal belt carrier!
After seemingly endless experimentation, trial and error and way too many hours of thought into the design, I present the results of it all. The photos below depict the first production sample to come off the fixture and tooling, which in itself took a lot of time to figure out how to make a quality product in a consistent fashion.
The HBC will be offered for both 1-inch bezel lights (Bodyguard, Dagger and Shogun) and 1-¼” bezel lights (Fat Boy). The photos below show the 1-¼” model with an 18350 Fat Boy CF light.
Design Objectives
Borrowing design elements from existing belt-mount light carriers, using suggestions from others and incorporating some ideas of my own, these are the objectives I set out to attain;
A quality product in design, fit and finish that owners of EDCLB lights would be willing to purchase
Compact, low-bulk dimensions to make carrying the light on a belt comfortable and concealable
The quick mount/dismount ability of a belt clip with the security of a fixed belt loop
Adjustable tension for user to set retention to their liking
Easy extraction of light from carrier and easy insertion
A high level of security from accidental dislodging and loss of light from the carrier
Ambidextrous, carrier opening facing forward or backward
Photos & Details
https://i.ibb.co/ryc027k/HBC-1.jpg
Photo 1 - the HBC mounted on a Wilderness Instructor belt;
A Velcro One-Wrap strap is used to secure the carrier to the belt (my thanks to Flamingo for suggesting this method)
The elastic belt keeper placed over the tailcap ensures complete retention of the light and pulls the back of the light tight to the belt for better concealment
https://i.ibb.co/hLGNX6T/HBC-2.jpg
Photo 2
The tension on the light is adjustable so the carrier will retain the light without use of the elastic belt keeper
https://i.ibb.co/XsSb29m/HBC-3.jpg
Photo 3
The HBC and elastic belt keeper installed on the belt ready to carry a light.
https://i.ibb.co/6BNQ8cc/HBC-4.jpg
Photo 4
The front of the Kydex carrier is crimped to prevent the light from sliding/falling out the front
The Velcro One-Wrap strap is fully captured in the carrier
https://i.ibb.co/r3gQt7B/HBC-5.jpg
Photo 5
The One-Wrap strap is long enough to fully wrap the carrier and end under the back of the belt to ensure it doesn't unwrap
https://i.ibb.co/zQM7kF6/HBC-6.jpg
Photo 6
Insertion end of carrier showing clamp and tension adjustment hardware
https://i.ibb.co/mhN80RD/HBC-7.jpg
Photo 7
A pad of Velcro loop is installed on the carrier to securely hold it in place and prevent it from shifting when extracting or inserting the light
The end of the One-Wrap strap is folded over and bonded together to provide a finished end and prevent fraying
The HBC will come with the elastic belt keeper and a patch of adhesive Velcro loop to place on the back of leather belts to keep the carrier from sliding.
Sell price will be $39.50
My goal is to have production supplies on-hand and both models (1 and 1-1/4 inch) listed on the EDCLB website in about a week. Lead time will be two weeks, but my plan is to build some inventory once I get my production time down while maintaining (or improving) quality. If you're interested contact me via PM and I will prioritize the first batch.
Thanks for taking a look, I will be posting photos of the 1-inch model in this thread soon!
After seemingly endless experimentation, trial and error and way too many hours of thought into the design, I present the results of it all. The photos below depict the first production sample to come off the fixture and tooling, which in itself took a lot of time to figure out how to make a quality product in a consistent fashion.
The HBC will be offered for both 1-inch bezel lights (Bodyguard, Dagger and Shogun) and 1-¼” bezel lights (Fat Boy). The photos below show the 1-¼” model with an 18350 Fat Boy CF light.
Design Objectives
Borrowing design elements from existing belt-mount light carriers, using suggestions from others and incorporating some ideas of my own, these are the objectives I set out to attain;
A quality product in design, fit and finish that owners of EDCLB lights would be willing to purchase
Compact, low-bulk dimensions to make carrying the light on a belt comfortable and concealable
The quick mount/dismount ability of a belt clip with the security of a fixed belt loop
Adjustable tension for user to set retention to their liking
Easy extraction of light from carrier and easy insertion
A high level of security from accidental dislodging and loss of light from the carrier
Ambidextrous, carrier opening facing forward or backward
Photos & Details
https://i.ibb.co/ryc027k/HBC-1.jpg
Photo 1 - the HBC mounted on a Wilderness Instructor belt;
A Velcro One-Wrap strap is used to secure the carrier to the belt (my thanks to Flamingo for suggesting this method)
The elastic belt keeper placed over the tailcap ensures complete retention of the light and pulls the back of the light tight to the belt for better concealment
https://i.ibb.co/hLGNX6T/HBC-2.jpg
Photo 2
The tension on the light is adjustable so the carrier will retain the light without use of the elastic belt keeper
https://i.ibb.co/XsSb29m/HBC-3.jpg
Photo 3
The HBC and elastic belt keeper installed on the belt ready to carry a light.
https://i.ibb.co/6BNQ8cc/HBC-4.jpg
Photo 4
The front of the Kydex carrier is crimped to prevent the light from sliding/falling out the front
The Velcro One-Wrap strap is fully captured in the carrier
https://i.ibb.co/r3gQt7B/HBC-5.jpg
Photo 5
The One-Wrap strap is long enough to fully wrap the carrier and end under the back of the belt to ensure it doesn't unwrap
https://i.ibb.co/zQM7kF6/HBC-6.jpg
Photo 6
Insertion end of carrier showing clamp and tension adjustment hardware
https://i.ibb.co/mhN80RD/HBC-7.jpg
Photo 7
A pad of Velcro loop is installed on the carrier to securely hold it in place and prevent it from shifting when extracting or inserting the light
The end of the One-Wrap strap is folded over and bonded together to provide a finished end and prevent fraying
The HBC will come with the elastic belt keeper and a patch of adhesive Velcro loop to place on the back of leather belts to keep the carrier from sliding.
Sell price will be $39.50
My goal is to have production supplies on-hand and both models (1 and 1-1/4 inch) listed on the EDCLB website in about a week. Lead time will be two weeks, but my plan is to build some inventory once I get my production time down while maintaining (or improving) quality. If you're interested contact me via PM and I will prioritize the first batch.
Thanks for taking a look, I will be posting photos of the 1-inch model in this thread soon!