View Full Version : Sig P226 40 to 9mm conversion
g4pi09
08-11-2022, 08:43 PM
Is it possible to convert a p226 from 40 to 9 with just a simple barrel and recoil spring swap or is that not recommended? I can’t find the 226 caliber xchange kits anywhere. Thanks
rathos
08-13-2022, 05:26 PM
barrel and recoil spring won't work. You need the 9mm slide as well.
claymore504
08-13-2022, 05:44 PM
You could build it using parts. Here are some slide options
https://www.midwestgunworks.com/sig-sauer-p226/slide.html
rathos
08-13-2022, 06:02 PM
I bought an upper from these guys a bit ago for my P229 to convert it to a 9mm red dot gun. They have a MK25 assembly for the 226 right now:
https://www.matrixprecisionparts.com/sigparts/nd22b7mfnsbs4htnspdqpj3z0utgtp
Mark D
08-13-2022, 06:42 PM
I can't speak to the 226, but I dropped a 9mm conversion barrel into my .40 S&W 229 and it ran fine. Didn't put a lot of rounds through the pistol before trading it, but had no issues. Didn't change mags or springs. YMMV. Conversion barrel was from Bar-sto.
Is it possible to convert a p226 from 40 to 9 with just a simple barrel and recoil spring swap or is that not recommended? I can’t find the 226 caliber xchange kits anywhere. Thanks
barrel and recoil spring won't work. You need the 9mm slide as well.
Sort of. You can’t drop a standard 9mm 226 barrel into a .40 slide.
You need either a complete 9mm slide assembly or a dedicated 40-9 conversion barrel. The 40-9 conversion barrel differs in that it has the external dimensions of .40 cal barrels.
Barsto and others make 40-9 conversion barrels for the SIG 226 and 229.
https://www.topgunsupply.com/bar-sto-conversion-barrel-sig-p226-9mm.html
I have a Barsto 40-9 barrel for my 229. For range purposes it works just fine with the 40 Cal recoil spring and 40 Cal magazines.
For any kind of serious use I would probably just invest in a complete slide assembly.
Fordtough25
08-16-2022, 10:19 AM
Sort of. You can’t drop a standard 9mm 226 barrel into a .40 slide.
You need either a complete 9mm slide assembly or a dedicated 40-9 conversion barrel. The 40-9 conversion barrel differs in that it has the external dimensions of .40 cal barrels.
Barsto and others make 40-9 conversion barrels for the SIG 226 and 229.
https://www.topgunsupply.com/bar-sto-conversion-barrel-sig-p226-9mm.html
I have a Barsto 40-9 barrel for my 229. For range purposes it works just fine with the 40 Cal recoil spring and 40 Cal magazines.
For any kind of serious use I would probably just invest in a complete slide assembly.
This exactly, I used to have a PD trade in 226 with a 40-9mm conversion barrel, shot just fine plinking.
Sammy1
08-19-2022, 09:19 AM
I bought a Mk25 slide assembly dirt cheap on sale. Keep an eye out for 226 9mm complete slide assemblies on sale.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.