Any interest in a short reach trigger for the Beretta PX4?

[queenofcalifornia]

Small hand gang here, recently been wondering why there hasn't been a short reach trigger for the PX4 like there has for the 92 series guns. Trigger reach is probably the only reason I haven't switched over to the PX4 yet.

Paging WilsonCombatRep e_stern LangdonTactical

[PX4 Storm Tracker]

Small hand gang here, recently been wondering why there hasn't been a short reach trigger for the PX4 like there has for the 92 series guns. Trigger reach is probably the only reason I haven't switched over to the PX4 yet.

Paging WilsonCombatRep e_stern LangdonTactical

Your question is a good one. While we await some answers, have you ever tried the smallest backstrap on a PX4 Storm? It makes for a very short trigger reach.

[beenalongtime]

Bingo, what PX4 Storm Tracker said.
Can't change backstraps on a 92. They haven't figured out how to make a decent metal trigger for the PX4.

[Hot Sauce]

I would appreciate a short reach trigger being available. It's not a deal breaker now, but definitely another option would be helpful. I didn't find any difference in reach between using the M and S backstraps.

[MrInox]

Had a px4 compact once, loved the buttery smooth action and the fact that it wouldn’t rub me raw when carried agains skin like certain other guns have…..that double action trigger reach killed it for me though……my stubby finger just couldn’t cope over extended range sessions…….I actually did some research on if there was any way to shorten the DA reach but didn’t find anything…..ended up selling it…

[MattyD380]

I have small hands and I never found the PX4’s DA reach to be troublesome. I do find that it has some overtravel; the sights bounce and I throw my DA shots slightly right.

[Hot Sauce]

I have small hands and I never found the PX4’s DA reach to be troublesome. I do find that it has some overtravel; the sights bounce and I throw my DA shots slightly right.
I think the issue is most palpable to people with not just small hands but short fingers.

[Colt191145lover]

I always wanted a steel trigger for the PX4 with the same shape as the 92s. I think that would shorten the reach a tiny bit.

[Hot Sauce]

I always wanted a steel trigger for the PX4 with the same shape as the 92s. I think that would shorten the reach a tiny bit.I'd be in for a few. Even if it wasn't steel.

[That Guy]

YWhile we await some answers, have you ever tried the smallest backstrap on a PX4 Storm? It makes for a very short trigger reach.

I wouldn't call it very short, more like similar to other TDA pistols. I use size small Mechanics gloves and I can shoot the PX4 just fine with either a medium or small grip insert (never tried the large one, since no need), but I do have an "H grip" on the gun.

[learnerpermitted]

Whats the general consensus about carrying half-cocked to reduce the trigger reach? I personally wouldn't do it, but I've heard of some people doing that.

[jtcarm]

I think the issue is most palpable to people with not just small hands but short fingers.

That would be me: normal hands, stubby fingers.

I find most DA/SA autos a challenge.

[PX4 Storm Tracker]

Whats the general consensus about carrying half-cocked to reduce the trigger reach? I personally wouldn't do it, but I've heard of some people doing that.

My opinion is that it would be a bad idea. Here are some reasons:

You expose the back of your firing pin plunger to debris, lint or other things. These things can get between your hammer and the firing pin plunger when it is time to strike that primer.

The hammer would be resting on the sear. If it were to receive a whack from an elbow, doorway or some other thing, the stress would be delivered straight onto the sear.

If you have a type F that uses a safety, you would not be able to engage the safety without dropping the hammer fully.

The leverage to bring the hammer back is increased. Therefore, if you were to bump your hammer a little bit you could accidentally bring it to full cock.

Being on half-cock decreases your leverage to overpower the hammer forward while holstering with your thumb on it.


When you go to the range to practice your drills and shooting, will you use your decocker lever to drop your hammer, then reach up and thumb it to half-cock? If not, you would not be practicing with the trigger pull that you will be facing in a self-defense situation.

[JTQ]

Decreasing the trigger weight may help.

I recently got a Langdon PX4 Carry (full size) with the trigger job. I wear a men's small glove and can't get my finger very deep onto the trigger, but the trigger pull is light enough that I don't need as much leverage on the PX4 trigger as I do with my other DA guns, an S&W 4506 and S&W 686.

I need to get my trigger finger to the joint to best operate the S&W guns, but so far at least, it seems as if I can comfortably work the PX4 with just the pad of my trigger finger.