Ram48
07-13-2012, 07:44 PM
I am fairly new to reloading and have a question for the more experienced re loaders on here.
I loaded once fired brass that was cleaned with Winchester small pistol primers, Bullseye powder (the min 3.1 gr) and Magnus 158 gr LSWC factory lubed bullets set to 1.460 OL. with a light roll crimp using the Lee Factory crimp die.
I seemed to have a large amount of smoke when fired and also noticed a bit of a dark (soot?) spot on one side of the fired brass.
Any help with this would be great.
Thanks
Ray
I loaded once fired brass that was cleaned with Winchester small pistol primers, Bullseye powder (the min 3.1 gr) and Magnus 158 gr LSWC factory lubed bullets set to 1.460 OL. with a light roll crimp using the Lee Factory crimp die.
I seemed to have a large amount of smoke when fired and also noticed a bit of a dark (soot?) spot on one side of the fired brass.
Any help with this would be great.
Thanks
Ray